What is a Walking beam billet heating furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Walking beam billet heating furnaceIt is a forging heating device using gas as fuel.。The following is to introduce the Walking beam billet heating furnace:

1、Brief introduction of Walking beam billet heating furnace

Walking beam billet heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is an advanced Walking beam billet heating furnace developed by our company in combination with the actual situation of the industry。

Walking beam billet heating furnace

2、Walking beam billet heating furnace HD picture real shot

The Walking beam billet heating furnace has a beautiful appearance and atmosphere for our customers' reference.。

Walking beam billet heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Walking beam billet heating furnace principle

Walking beam billet heating furnaceat the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，is a popular Walking beam billet heating furnace。

Walking beam billet heating furnace

4、Introduction of Walking beam billet heating furnace characteristics

Walking beam billet heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Walking beam billet heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Efficient heating

The Walking beam billet heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Stable and reliable

The Walking beam billet heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Walking beam billet heating furnace

5、Walking beam billet heating furnace structure composition

The Walking beam billet heating furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. furnace chamber

A space for holding metallic materials for heating.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Walking beam billet heating furnace

6、How much is the Walking beam billet heating furnace?

The Walking beam billet heating furnace price is introduced as follows:

1. market quotation

The difference between the supply and demand of manufacturers and customers will also affect the Walking beam billet heating furnace price. When the demand of customers on the market increases and the supply of products by manufacturers is small, the Walking beam billet heating furnace price will increase with the increase of demand. On the contrary, when the supply of product manufacturers on the market exceeds the demand of customers, the Walking beam billet heating furnace price will decrease.

2. raw material

The quality of material selection is one of the main factors that directly affect the Walking beam billet heating furnace. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Walking beam billet heating furnace price and service can meet the actual needs of customers.

5. Brand strength

At present, there are various brands of Walking beam billet heating furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Walking beam billet heating furnace are different.

Walking beam billet heating furnace

Walking beam billet heating furnacefeatures include Strong adaptability, Easy to maintain, energy saving and environmental protection, Stable and reliable and Easy to maintain，multifunctional, with functions such as Casting heating, normalizing, hardening and tempering, Forging heating and temper。