What is a Chain belt spheroidization annealing furnace? Introduction to the advantages and characteristics of the Forging furnace

Chain belt spheroidization annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，multifunctional, with functions such as normalizing, Forging heating, heat treatment, quench and normalizing，Stable and reliable,energy saving and environmental protection,energy-efficient,Strong adaptability,Easy to control，it has the structure of furnace chamber, recovery of waste heat, ventilation system, Radiation chamber and convection chamber，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。The following is to introduce the Chain belt spheroidization annealing furnace:

1、Brief introduction of Chain belt spheroidization annealing furnace

Chain belt spheroidization annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks beautiful.，is designed by One-combustion energy saving with advanced technology。

Chain belt spheroidization annealing furnace

2、Chain belt spheroidization annealing furnace application

Chain belt spheroidization annealing furnaces have the following purposes.

1. Improve production efficiency

The Chain belt spheroidization annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal forging heating

The Chain belt spheroidization annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Chain belt spheroidization annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Chain belt spheroidization annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Energy conservation and environmental protection

The Chain belt spheroidization annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Chain belt spheroidization annealing furnace

3、Structural characteristics of Chain belt spheroidization annealing furnace

The Chain belt spheroidization annealing furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. Radiation chamber

The heat load of the main place for Chain belt spheroidization annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Chain belt spheroidization annealing furnace

4、Chain belt spheroidization annealing furnace function

Chain belt spheroidization annealing furnaceit has the functions of Forging heating, heat treatment, temper, Casting heating and anneal，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It is an efficient, energy-saving and environment-friendly metal heating device.，support customization。

Chain belt spheroidization annealing furnace

5、How much is the Chain belt spheroidization annealing furnace?

The Chain belt spheroidization annealing furnace price is introduced as follows:

1. type of operation

There are direct selling manufacturers and agents in the market. Agents are higher than direct selling manufacturers, mainly because agents get goods from manufacturers, sell them to customers and earn the difference from middlemen, so the natural price is higher.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. geographical position

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving detailed address:Zhangqiu Niu Yi Industrial Park, Ji 'nan City, Shandong Province has convenient transportation, which provides a good convenience for the transportation of Chain belt spheroidization annealing furnace.

4. Model type

Because there are many models of each product, different customers have different requirements for product performance, and the product specifications and models that are inevitably used will be different. Different models of the same product will lead to different prices.

5. product model

Different models will have different specifications, which will lead to greater differences in the comprehensive configuration of products, which will also lead to greater changes in prices.

Chain belt spheroidization annealing furnace

6、company strength

The company has many years of Chain belt spheroidization annealing furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Chain belt spheroidization annealing furnaceis a Chain belt spheroidization annealing furnace，in the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it mainly includes ventilation system, combustor, ventilation system, recovery of waste heat and furnace chamber，This Chain belt spheroidization annealing furnaceThe structural design is more advanced and reasonable.。