What is a Chain quenching furnace? Introduction to the advantages and characteristics of heating furnace functions

Chain quenching furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，support customization。The following is to introduce the Chain quenching furnace:

1、Brief introduction of Chain quenching furnace

Chain quenching furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，The overall structural design is simple and novel.，the main structure includes convection chamber, ventilation system, recovery of waste heat, ventilation system, convection chamber and so on，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it is an ideal choice for customers to buy Chain quenching furnace。

Chain quenching furnace

2、Introduction of Chain quenching furnace characteristics

Chain quenching furnace has the following characteristics

1. Easy to maintain

The structural design of the Chain quenching furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Chain quenching furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Stable and reliable

The Chain quenching furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

The combustion system and ventilation system of the Chain quenching furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Chain quenching furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Chain quenching furnace

3、Chain quenching furnace video detail

You can buy Chain quenching furnace according to your needs and show you product videos.。

Chain quenching furnace

As you can see from the live video.，One-combustion energy saving the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。

4、Chain quenching furnace application

Chain quenching furnaces have the following purposes.

1. Improve production efficiency

The Chain quenching furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal tempering

By properly heating and cooling the metal material, the Chain quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Chain quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal heat treatment

In addition to forging heating, Chain quenching furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The Chain quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Chain quenching furnace

5、Chain quenching furnace HD real picture

Take a look at the high-definition drawings of Chain quenching furnace with excellent quality for our customers' reference.。

Chain quenching furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Chain quenching furnace price concessions

The Chain quenching furnace price is introduced as follows:

1. Overall configuration

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. One-combustion energy saving has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

2. Brand strength

At present, there are various brands of Chain quenching furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Chain quenching furnace are different.

3. Reasonable cost

When the Chain quenching furnace is manufactured, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. raw material

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

Chain quenching furnace

Chain quenching furnaceIt is a forging heating device using gas as fuel.，is a Chain quenching furnace，The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。