Introduction to Iron ingot heating furnace, how much is the price of the heating furnace?

Iron ingot heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，multifunctional, with functions such as normalizing, temper, heat treatment, temper and Forging heating，generally, it is composed of ventilation system, ventilation system, furnace chamber, convection chamber, recovery of waste heat and other major components，This Iron ingot heating furnaceThe overall structural design is relatively simple，be loved by our customers.。

1、Brief introduction of Iron ingot heating furnace

Iron ingot heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a kind of high quality and low price Iron ingot heating furnace，the product looks atmospheric.，It has a wide range of uses, and is often used inMetal heat treatment,Metal melting and casting,Energy conservation and environmental protection,Energy conservation and environmental protection,Improve production efficiency and so on，it has the functions of Casting heating, quench, normalizing, anneal and hardening and tempering。

Iron ingot heating furnace

2、Iron ingot heating furnace application

Iron ingot heating furnaces have the following purposes.

1. Energy conservation and environmental protection

The Iron ingot heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, Iron ingot heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Iron ingot heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal tempering

By properly heating and cooling the metal material, the Iron ingot heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Iron ingot heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Iron ingot heating furnace

3、Structural advantages of Iron ingot heating furnace

The Iron ingot heating furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Iron ingot heating furnace

4、Iron ingot heating furnace work site real shot

Exquisite design, excellent material selection, reliable quality and high-definition pictures for our customers to visit.。

Iron ingot heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Introduction of Iron ingot heating furnace characteristics

Iron ingot heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Iron ingot heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Iron ingot heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Stable and reliable

The Iron ingot heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Strong adaptability

The Iron ingot heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Stable and reliable

The Iron ingot heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Iron ingot heating furnace

6、Iron ingot heating furnace principle

Iron ingot heating furnacethe principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the main features are energy saving and environmental protection, Strong adaptability, energy-efficient, energy saving and environmental protection and Easy to control。

Iron ingot heating furnace

Iron ingot heating furnacethe advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the product looks beautiful.。