Introduction to Quenching chain furnace and forging furnace working principle

Quenching chain furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，multifunctional, with functions such as anneal, hardening and tempering, quench, normalizing and Forging heating。

1、Brief introduction of Quenching chain furnace

Quenching chain furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

Quenching chain furnace

2、Quenching chain furnace principle

Quenching chain furnaceat work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It can be used for Improve production efficiency, Metal heat treatment, Metal tempering, Metal tempering, Energy conservation and environmental protection, Metal melting and casting and so on，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the structure of furnace chamber, Radiation chamber, ventilation system, furnace chamber and recovery of waste heat，the product looks beautiful.。

Quenching chain furnace

3、Functional advantages of Quenching chain furnace

Quenching chain furnaces have the following advantages.

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Quenching chain furnace can significantly reduce energy consumption, thus reducing operating costs.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Rapid temperature rise

The Quenching chain furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Improve product quality

Because the Quenching chain furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Extend the service life of equipment

The Quenching chain furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Quenching chain furnace

4、Quenching chain furnace application

Quenching chain furnaces have the following purposes.

1. Improve production efficiency

The Quenching chain furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Energy conservation and environmental protection

The Quenching chain furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Improve production efficiency

The Quenching chain furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Energy conservation and environmental protection

The Quenching chain furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Quenching chain furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Quenching chain furnace

5、Introduction of advantages of Quenching chain furnace

The advantages of Quenching chain furnace are as follows:

1. Uniform heating

The Quenching chain furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Intelligent control

The Quenching chain furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. easy to operate

The operation interface of the Quenching chain furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Quenching chain furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Multiple fuel options

Although the Quenching chain furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Quenching chain furnace

6、One-combustion energy saving delivery site

The following is the live video of Quenching chain furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability. of Quenching chain furnace.。

Quenching chain furnace

As you can see from the live video.One-combustion energy saving at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

Quenching chain furnaceit is usually composed of combustor, ventilation system, recovery of waste heat, combustor and convection chamber，productThe overall structural design is relatively simple and compact.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。