Introduction to High temperature chain heating furnace and Forging furnace advantages and features

High temperature chain heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a common High temperature chain heating furnace，the main features are Strong adaptability, energy-efficient, Easy to control, Easy to maintain and Stable and reliable，multifunctional, with functions such as normalizing, quench, anneal, temper and hardening and tempering，was developed and designed by One-combustion energy saving。

1、Brief introduction of High temperature chain heating furnace

High temperature chain heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

High temperature chain heating furnace

2、High temperature chain heating furnace application

High temperature chain heating furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, High temperature chain heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal forging heating

The High temperature chain heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of High temperature chain heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The High temperature chain heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Improve production efficiency

The High temperature chain heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

High temperature chain heating furnace

3、High temperature chain heating furnace advantage

The advantages of High temperature chain heating furnace are as follows:

1. Improve product quality

Because the High temperature chain heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Efficient combustion

The High temperature chain heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Wide application range

The High temperature chain heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the High temperature chain heating furnace can significantly reduce energy consumption, thus reducing operating costs.

5. easy to operate

The operation interface of the High temperature chain heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

High temperature chain heating furnace

4、Structural characteristics of High temperature chain heating furnace

The High temperature chain heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for High temperature chain heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

High temperature chain heating furnace

5、High temperature chain heating furnace HD real shot

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the High temperature chain heating furnace production process and production site, and gain favorable comments and recognition from customers.。

High temperature chain heating furnace

As you can see from the live video.，One-combustion energy saving it is widely used in machinery, chemical industry, material, pharmacy and Machinery manufacturing。

6、Brief introduction of One-combustion energy saving

Shandong yiran energy-saving environment protection co., ltd, located in Shandong(Province), is a large High temperature chain heating furnace manufacturer. The High temperature chain heating furnace produced have good performance, low price, reasonable structure and excellent quality. The key is reasonable price. Welcome new and old customers to visit and buy.。

One-combustion energy saving

High temperature chain heating furnaceIt is a forging heating device using gas as fuel.，it has the characteristics of energy saving and environmental protection, Strong adaptability, energy saving and environmental protection, Easy to control and energy-efficient。