What is a Regenerative burner chain annealing furnace? Introduction to the advantages and characteristics of forging furnace functions

Regenerative burner chain annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，the principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，Commonly used inMetal tempering,Improve production efficiency,Metal forging heating,Energy conservation and environmental protection,Metal melting and casting and so on，the product looks atmospheric.。

1、Brief introduction of Regenerative burner chain annealing furnace

Regenerative burner chain annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a popular Regenerative burner chain annealing furnace，Structure consists of recovery of waste heat, furnace chamber, Radiation chamber, convection chamber, combustor and so on，This Regenerative burner chain annealing furnaceThe overall structural design is relatively simple and compact.。

Regenerative burner chain annealing furnace

2、Regenerative burner chain annealing furnace principle

Regenerative burner chain annealing furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It can be used for Metal tempering, Metal heat treatment, Improve production efficiency, Energy conservation and environmental protection, Metal forging heating, Metal melting and casting and so on。

Regenerative burner chain annealing furnace

3、Regenerative burner chain annealing furnace video

Speak directly with facts on the spot。

Regenerative burner chain annealing furnace

As you can see from the live video.，One-combustion energy saving is a kind of high quality and low price Regenerative burner chain annealing furnace。

4、Introduction of advantages of Regenerative burner chain annealing furnace

Regenerative burner chain annealing furnaces have the following advantages.

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Regenerative burner chain annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

2. Intelligent control

The Regenerative burner chain annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. easy to operate

The operation interface of the Regenerative burner chain annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Improve product quality

Because the Regenerative burner chain annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Multiple fuel options

Although the Regenerative burner chain annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Regenerative burner chain annealing furnace

5、Regenerative burner chain annealing furnace function

Regenerative burner chain annealing furnaceit has the functions of quench, hardening and tempering, heat treatment, quench and temper，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，Widely used inMetal tempering,Metal heat treatment,Improve production efficiency,Energy conservation and environmental protection,Metal heat treatment and so on，be loved by our customers.。

Regenerative burner chain annealing furnace

6、One-combustion energy saving's after-sales service

Our company One-combustion energy saving is not only good in product quality, but also professional in service, which can provide customers with high-standard services and tailor products according to their on-site construction conditions to ensure that they can meet their different needs. In addition, our company also carries out on-site product installation and debugging for customers, and trains staff on product operation knowledge and precautions, in order to make them operate products better and prolong the service life of products. In addition, if you have other questions, you can click on the online consultation, and a professional will answer them for you.。

One-combustion energy saving

Regenerative burner chain annealing furnaceUsually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，at runtime,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。