Introduction to Regenerative burner chain heating furnace, how much is the price of the Forging furnace?

Regenerative burner chain heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

1、Brief introduction of Regenerative burner chain heating furnace

Regenerative burner chain heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it is widely used in light industry, war industry, chemical industry, automobile, heat treatment and other industries，at the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the product looks atmospheric.，was developed and designed by One-combustion energy saving。

Regenerative burner chain heating furnace

2、Regenerative burner chain heating furnace characteristics

The Regenerative burner chain heating furnace features are as follows:

1. Efficient heating

The Regenerative burner chain heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to maintain

The structural design of the Regenerative burner chain heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Stable and reliable

The Regenerative burner chain heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Regenerative burner chain heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Regenerative burner chain heating furnace

3、Regenerative burner chain heating furnace video detail

The following is the live video of Regenerative burner chain heating furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost. of Regenerative burner chain heating furnace.。

Regenerative burner chain heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the main features are energy saving and environmental protection, Easy to maintain, energy-efficient, Easy to maintain and energy saving and environmental protection。

4、Regenerative burner chain heating furnace structure composition

The Regenerative burner chain heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Radiation chamber

The heat load of the main place for Regenerative burner chain heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. Radiation chamber

The heat load of the main place for Regenerative burner chain heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Regenerative burner chain heating furnace

5、Advantages of Regenerative burner chain heating furnace principle

Regenerative burner chain heating furnacethe principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is a Regenerative burner chain heating furnace newly developed by One-combustion energy saving。

Regenerative burner chain heating furnace

6、Regenerative burner chain heating furnace price

The Regenerative burner chain heating furnace price is introduced as follows:

1. Reasonable cost

The manufacturer has a fixed raw material supplier, so that the raw material price given by the raw material supplier to the manufacturer will be lower, the raw material cost invested by the manufacturer will be reduced, and the price of the Regenerative burner chain heating furnace will also be reduced.

2. raw material

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

3. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Regenerative burner chain heating furnace price and service can meet the actual needs of customers.

4. quality factor

Quality is the fundamental factor that determines the price. The better the quality, the more detailed the manufacturing process, the more careful the materials are, the better the performance is, and the price will naturally be more expensive.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Regenerative burner chain heating furnace

Regenerative burner chain heating furnaceMainly used forMetal forging heating,Metal melting and casting,Metal tempering,Improve production efficiency andEnergy conservation and environmental protection，multifunctional, with functions such as Casting heating, Forging heating, anneal, normalizing and hardening and tempering。