Introduction to Regenerative burner chain heat treatment furnace, advantages, characteristics and principles of heating furnace

Regenerative burner chain heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。The following is to introduce the Regenerative burner chain heat treatment furnace:

1、Brief introduction of Regenerative burner chain heat treatment furnace

Regenerative burner chain heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a common Regenerative burner chain heat treatment furnace，it is an ideal choice for customers to buy Regenerative burner chain heat treatment furnace。

Regenerative burner chain heat treatment furnace

2、Regenerative burner chain heat treatment furnace application

Regenerative burner chain heat treatment furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Regenerative burner chain heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal forging heating

The Regenerative burner chain heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Regenerative burner chain heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Energy conservation and environmental protection

The Regenerative burner chain heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative burner chain heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Regenerative burner chain heat treatment furnace

3、Regenerative burner chain heat treatment furnace advantage

The advantages of Regenerative burner chain heat treatment furnace are as follows:

1. Extend the service life of equipment

The Regenerative burner chain heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Wide application range

The Regenerative burner chain heat treatment furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Efficient combustion

The Regenerative burner chain heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Uniform heating

The Regenerative burner chain heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Rapid temperature rise

The Regenerative burner chain heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Regenerative burner chain heat treatment furnace

4、Regenerative burner chain heat treatment furnace field real shot

One-combustion energy saving Regenerative burner chain heat treatment furnace came in many pictures, which made everyone feast their eyes.。

Regenerative burner chain heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Regenerative burner chain heat treatment furnace advantage

Regenerative burner chain heat treatment furnaces have the following advantages.

1. Improve product quality

Because the Regenerative burner chain heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. easy to operate

The operation interface of the Regenerative burner chain heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Intelligent control

The Regenerative burner chain heat treatment furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Extend the service life of equipment

The Regenerative burner chain heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Efficient combustion

The Regenerative burner chain heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Regenerative burner chain heat treatment furnace

6、Regenerative burner chain heat treatment furnace performance advantage

The advantages of Regenerative burner chain heat treatment furnace are as follows:

1. Rapid temperature rise

The Regenerative burner chain heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Multiple fuel options

Although the Regenerative burner chain heat treatment furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Regenerative burner chain heat treatment furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Wide application range

The Regenerative burner chain heat treatment furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Uniform heating

The Regenerative burner chain heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Regenerative burner chain heat treatment furnace

Regenerative burner chain heat treatment furnaceThe metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，It is a forging heating device using gas as fuel.，The overall structural design is simple and novel.，generally, it is composed of ventilation system, ventilation system, ventilation system, furnace chamber, recovery of waste heat and other major components。