Introduction to Regenerative burner chain furnace, introduction to Forging furnace advantages and characteristics

Regenerative burner chain furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，has been favored by more and more customers.。The following is to introduce the Regenerative burner chain furnace:

1、Brief introduction of Regenerative burner chain furnace

Regenerative burner chain furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the characteristics of energy-efficient, Easy to maintain, Easy to control, Strong adaptability and energy-efficient，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，favorable price，modern technology。

Regenerative burner chain furnace

2、Regenerative burner chain furnace HD real shot

On-site aerial photography of Regenerative burner chain furnace。

Regenerative burner chain furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd multifunctional, with functions such as Casting heating, quench, hardening and tempering, heat treatment and normalizing。

3、Regenerative burner chain furnace use

The purpose of Regenerative burner chain furnace is introduced as follows:

1. Metal forging heating

The Regenerative burner chain furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Improve production efficiency

The Regenerative burner chain furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal heat treatment

In addition to forging heating, Regenerative burner chain furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Regenerative burner chain furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal tempering

By properly heating and cooling the metal material, the Regenerative burner chain furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Regenerative burner chain furnace

4、Regenerative burner chain furnace real shot picture

Regenerative burner chain furnace HD real shot, a variety of specifications and models display, for our customers to choose at will.。

Regenerative burner chain furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Introduction of advantages of Regenerative burner chain furnace

The advantages of Regenerative burner chain furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Uniform heating

The Regenerative burner chain furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Improve product quality

Because the Regenerative burner chain furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Rapid temperature rise

The Regenerative burner chain furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Regenerative burner chain furnace

Regenerative burner chain furnaceat the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It is a forging heating device using gas as fuel.，Stable and reliable,energy saving and environmental protection,Easy to maintain,Easy to control,Strong adaptability。