Introduction to Regenerative natural gas chain annealing furnace and forging furnace working principle

Regenerative natural gas chain annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is a Regenerative natural gas chain annealing furnace，It has the functions of Metal tempering, Metal melting and casting, Metal forging heating, Metal heat treatment and Metal tempering，the principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

1、Brief introduction of Regenerative natural gas chain annealing furnace

Regenerative natural gas chain annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it is widely used inbuilding materials,material,Household necessities,metallurgy,chemical industry and other industries，it is mainly composed of Radiation chamber, convection chamber, ventilation system, recovery of waste heat and ventilation system，productThe structure is novel, special, advanced, reasonable and scientific.，the product looks beautiful.，was developed and designed by One-combustion energy saving。

Regenerative natural gas chain annealing furnace

2、Structural advantages of Regenerative natural gas chain annealing furnace

The Regenerative natural gas chain annealing furnace has the following structure

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. furnace chamber

A space for holding metallic materials for heating.

3. Radiation chamber

The heat load of the main place for Regenerative natural gas chain annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Regenerative natural gas chain annealing furnace

3、Regenerative natural gas chain annealing furnace application

Regenerative natural gas chain annealing furnaces have the following purposes.

1. Improve production efficiency

The Regenerative natural gas chain annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal tempering

By properly heating and cooling the metal material, the Regenerative natural gas chain annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal heat treatment

In addition to forging heating, Regenerative natural gas chain annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative natural gas chain annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Improve production efficiency

The Regenerative natural gas chain annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Regenerative natural gas chain annealing furnace

4、On-site real shot of Regenerative natural gas chain annealing furnace

Various styles and styles of Regenerative natural gas chain annealing furnace, complete models, for you to choose at will.。

Regenerative natural gas chain annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Regenerative natural gas chain annealing furnace working site

On-site aerial photography of Regenerative natural gas chain annealing furnace。

Regenerative natural gas chain annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd is a kind of high quality and low price Regenerative natural gas chain annealing furnace。

6、Regenerative natural gas chain annealing furnace structure composition

The Regenerative natural gas chain annealing furnace structure is introduced as follows:

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. furnace chamber

A space for holding metallic materials for heating.

4. Radiation chamber

The heat load of the main place for Regenerative natural gas chain annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Regenerative natural gas chain annealing furnace

Regenerative natural gas chain annealing furnacefeatures include energy-efficient, Stable and reliable, Easy to control, energy saving and environmental protection and Easy to maintain，It is a product series that integrates Energy conservation and environmental protection, Metal melting and casting, Improve production efficiency, Metal forging heating and Metal heat treatment。