Introduction to Automatic temperature regulating chain annealing furnace, how much is the price of the forging furnace?

Automatic temperature regulating chain annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Cheap and high quality。

1、Brief introduction of Automatic temperature regulating chain annealing furnace

Automatic temperature regulating chain annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a popular Automatic temperature regulating chain annealing furnace，usually used in pharmacy, Household necessities, chemical industry, light industry, aerospace and other fields。

Automatic temperature regulating chain annealing furnace

2、Automatic temperature regulating chain annealing furnace characteristics

The Automatic temperature regulating chain annealing furnace features are as follows:

1. Efficient heating

The Automatic temperature regulating chain annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to maintain

The structural design of the Automatic temperature regulating chain annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Automatic temperature regulating chain annealing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Strong adaptability

The Automatic temperature regulating chain annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Stable and reliable

The Automatic temperature regulating chain annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Automatic temperature regulating chain annealing furnace

3、Video analysis of Automatic temperature regulating chain annealing furnace

You can buy Automatic temperature regulating chain annealing furnace according to your needs and show you Automatic temperature regulating chain annealing furnace videos.。

Automatic temperature regulating chain annealing furnace

As you can see from the live video.，One-combustion energy saving at the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

4、Automatic temperature regulating chain annealing furnace use

The purpose of Automatic temperature regulating chain annealing furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Automatic temperature regulating chain annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Automatic temperature regulating chain annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal heat treatment

In addition to forging heating, Automatic temperature regulating chain annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Automatic temperature regulating chain annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Automatic temperature regulating chain annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Automatic temperature regulating chain annealing furnace

5、Automatic temperature regulating chain annealing furnace structure

The Automatic temperature regulating chain annealing furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Radiation chamber

The heat load of the main place for Automatic temperature regulating chain annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Automatic temperature regulating chain annealing furnace

6、Introduction of Automatic temperature regulating chain annealing furnace characteristics

Automatic temperature regulating chain annealing furnace has the following characteristics

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Efficient heating

The Automatic temperature regulating chain annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Easy to maintain

The structural design of the Automatic temperature regulating chain annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Easy to control

The combustion system and ventilation system of the Automatic temperature regulating chain annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Stable and reliable

The Automatic temperature regulating chain annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Automatic temperature regulating chain annealing furnace

Automatic temperature regulating chain annealing furnacefeatures include Easy to control, Stable and reliable, energy saving and environmental protection, Easy to control and Strong adaptability，it is widely used in building materials, heat treatment, war industry, Machinery manufacturing, pharmacy and other industries。