Introduction to Automatic temperature regulating chain heating furnace, advantages, characteristics and principles of Forging furnace

Automatic temperature regulating chain heating furnaceIt is a forging heating device using gas as fuel.，it has the functions of normalizing, temper, hardening and tempering, quench and Casting heating，at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，The structural design is more advanced and reasonable.，it is mainly composed of combustor, furnace chamber, convection chamber, ventilation system and recovery of waste heat，the product looks beautiful.。The following is to introduce the Automatic temperature regulating chain heating furnace:

1、Brief introduction of Automatic temperature regulating chain heating furnace

Automatic temperature regulating chain heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，support customization。

Automatic temperature regulating chain heating furnace

2、Automatic temperature regulating chain heating furnace principle

Automatic temperature regulating chain heating furnaceat work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，It is a product series that integrates Metal melting and casting, Energy conservation and environmental protection, Metal melting and casting, Metal forging heating and Metal tempering，it is widely used inmachinery,Machinery manufacturing,shipping,heat treatment,electron and other industries，Structure consists of Radiation chamber, ventilation system, ventilation system, furnace chamber, ventilation system and so on，be loved by our customers.。

Automatic temperature regulating chain heating furnace

3、Automatic temperature regulating chain heating furnace use

The purpose of Automatic temperature regulating chain heating furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Automatic temperature regulating chain heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Automatic temperature regulating chain heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Energy conservation and environmental protection

The Automatic temperature regulating chain heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Automatic temperature regulating chain heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal tempering

By properly heating and cooling the metal material, the Automatic temperature regulating chain heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Automatic temperature regulating chain heating furnace

4、Automatic temperature regulating chain heating furnace introduction video

On-site aerial photography of Automatic temperature regulating chain heating furnace。

Automatic temperature regulating chain heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd is a Automatic temperature regulating chain heating furnace。

5、Automatic temperature regulating chain heating furnace performance advantage

The advantages of Automatic temperature regulating chain heating furnace are as follows:

1. Rapid temperature rise

The Automatic temperature regulating chain heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. easy to operate

The operation interface of the Automatic temperature regulating chain heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Intelligent control

The Automatic temperature regulating chain heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Improve product quality

Because the Automatic temperature regulating chain heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Automatic temperature regulating chain heating furnace

6、Automatic temperature regulating chain heating furnace quotation

The Automatic temperature regulating chain heating furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. select a qualified person

The quality of material selection is one of the main factors that directly affect the Automatic temperature regulating chain heating furnace. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

3. Low cost of raw materials

Cost plays a decisive role in the price. The cost mainly includes the initial investment of the product, such as time, manpower and materials selected. The more the investment cost, the higher the relative product pricing. On the contrary, the less the input cost, the lower the price.

4. Reasonable sales model

What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

5. Model size

Different product models will also affect the price changes. Different specifications and models will lead to different product prices.

Automatic temperature regulating chain heating furnace

Automatic temperature regulating chain heating furnacethe product looks beautiful.，the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，multifunctional, with functions such as temper, Forging heating, anneal, hardening and tempering and heat treatment。