What is a Energy saving and environmentally friendly chain furnace? Introduction to the advantages and characteristics of the heating furnace

Energy saving and environmentally friendly chain furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，multifunctional, with functions such as normalizing, temper, quench, hardening and tempering and Casting heating，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。

1、Brief introduction of Energy saving and environmentally friendly chain furnace

Energy saving and environmentally friendly chain furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the functions of heat treatment, quench, Casting heating, Forging heating and heat treatment，the product looks atmospheric.，it has been widely used in material, Household necessities, surface treatment, Household necessities, Machinery manufacturing and other industries，the main structure includes Radiation chamber, ventilation system, recovery of waste heat, ventilation system, ventilation system and so on，productThe structural design is simple, novel and special.。

Energy saving and environmentally friendly chain furnace

2、Energy saving and environmentally friendly chain furnace function

Energy saving and environmentally friendly chain furnacemultifunctional, with functions such as temper, normalizing, anneal, hardening and tempering and quench，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，is a Energy saving and environmentally friendly chain furnace newly developed by One-combustion energy saving。

Energy saving and environmentally friendly chain furnace

3、Structural advantages of Energy saving and environmentally friendly chain furnace

The Energy saving and environmentally friendly chain furnace has the following structure

1. Radiation chamber

The heat load of the main place for Energy saving and environmentally friendly chain furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Energy saving and environmentally friendly chain furnace

4、Introduction of Energy saving and environmentally friendly chain furnace characteristics

Energy saving and environmentally friendly chain furnace has the following characteristics

1. Easy to control

The combustion system and ventilation system of the Energy saving and environmentally friendly chain furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Efficient heating

The Energy saving and environmentally friendly chain furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Strong adaptability

The Energy saving and environmentally friendly chain furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Energy saving and environmentally friendly chain furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Stable and reliable

The Energy saving and environmentally friendly chain furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Energy saving and environmentally friendly chain furnace

5、Functional advantages of Energy saving and environmentally friendly chain furnace

The advantages of Energy saving and environmentally friendly chain furnace are as follows:

1. Uniform heating

The Energy saving and environmentally friendly chain furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Extend the service life of equipment

The Energy saving and environmentally friendly chain furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Improve product quality

Because the Energy saving and environmentally friendly chain furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Intelligent control

The Energy saving and environmentally friendly chain furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Wide application range

The Energy saving and environmentally friendly chain furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Energy saving and environmentally friendly chain furnace

6、Energy saving and environmentally friendly chain furnace price consultation

The Energy saving and environmentally friendly chain furnace price is introduced as follows:

1. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Energy saving and environmentally friendly chain furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Energy saving and environmentally friendly chain furnace price can meet the purchasing needs of customers.

2. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

3. company strength

The nature of the manufacturer can also greatly affect the price of the Energy saving and environmentally friendly chain furnace. General manufacturers are divided into direct sellers, agents and middlemen. If they are direct selling manufacturers, there are not too many intermediate links, and their sales prices are low.

4. sales mode

One-combustion energy saving Energy saving and environmentally friendly chain furnace manufacturer is a direct selling manufacturer, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Energy saving and environmentally friendly chain furnace price is also low.

5. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Energy saving and environmentally friendly chain furnace have more or less differences in price.

Energy saving and environmentally friendly chain furnace

Energy saving and environmentally friendly chain furnacegenerally, it is composed of recovery of waste heat, ventilation system, Radiation chamber, convection chamber, furnace chamber and other major components，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。