What is a Stick type spheroidization heat treatment furnace? Introduction to the advantages and characteristics of the heating furnace

Stick type spheroidization heat treatment furnaceIt is a forging heating device using gas as fuel.。

1、Brief introduction of Stick type spheroidization heat treatment furnace

Stick type spheroidization heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，it is usually composed of convection chamber, ventilation system, furnace chamber, Radiation chamber and ventilation system，productSimple structure and advanced technology.，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，support customization。

Stick type spheroidization heat treatment furnace

2、Stick type spheroidization heat treatment furnace function

Stick type spheroidization heat treatment furnacemultifunctional, with functions such as anneal, Forging heating, normalizing, temper and Casting heating，it is widely used in chemical industry, automobile, shipping, Household necessities, heat treatment and other industries，was developed and designed by One-combustion energy saving。

Stick type spheroidization heat treatment furnace

3、Functional advantages of Stick type spheroidization heat treatment furnace

Stick type spheroidization heat treatment furnaces have the following advantages.

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Wide application range

The Stick type spheroidization heat treatment furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Intelligent control

The Stick type spheroidization heat treatment furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. easy to operate

The operation interface of the Stick type spheroidization heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Uniform heating

The Stick type spheroidization heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Stick type spheroidization heat treatment furnace

4、Stick type spheroidization heat treatment furnace picture

Overview of high-definition pictures,the product looks beautiful.。

Stick type spheroidization heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Stick type spheroidization heat treatment furnace price

The Stick type spheroidization heat treatment furnace price is introduced as follows:

1. quality

Quality is one of the fundamental and important factors that affect the price. Usually, the better the quality of the Stick type spheroidization heat treatment furnace, the higher its price, and the quality is mainly affected by the manufacturing process, raw material materials, workers' experience and other factors. Therefore, if customers want to buy products with better quality, they can conduct on-the-spot visits to the product manufacturers to learn more about the scale, manufacturing process and production capacity of the manufacturers, so as to comprehensively judge the quality of the products.

2. Manufacturer scale

Our factory has mature and perfect production technology, advanced and intelligent processing technology, abundant labor resources and low investment. Coupled with the influence of special geographical location, our company has invested much less in manpower, material resources and financial resources than other manufacturers.

3. Low cost of raw materials

When the Stick type spheroidization heat treatment furnace is manufactured, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

4. deploy

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Stick type spheroidization heat treatment furnace are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Stick type spheroidization heat treatment furnace, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

5. region

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

Stick type spheroidization heat treatment furnace

6、One-combustion energy saving delivery site

The following is the live video of Stick type spheroidization heat treatment furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability. of One-combustion energy savingProduction and processing的Stick type spheroidization heat treatment furnace.。

Stick type spheroidization heat treatment furnace

As you can see from the live video.One-combustion energy saving is a kind of high quality and low price Stick type spheroidization heat treatment furnace。

Stick type spheroidization heat treatment furnaceat the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Mainly used forMetal forging heating,Metal tempering,Energy conservation and environmental protection,Metal heat treatment andMetal melting and casting。