Introduction to Continuous roll spheroidization heat treatment furnace, introduction to forging furnace advantages and characteristics

Continuous roll spheroidization heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it can be used in war industry, Household necessities, light industry, aerospace, building materials and other industries，the product looks beautiful.，it is mainly composed of furnace chamber, recovery of waste heat, ventilation system, combustor and ventilation system，Continuous roll spheroidization heat treatment furnaceThe overall structural design is simple and novel.，it is an ideal choice for customers to buy Continuous roll spheroidization heat treatment furnace。The following is to introduce the Continuous roll spheroidization heat treatment furnace:

1、Brief introduction of Continuous roll spheroidization heat treatment furnace

Continuous roll spheroidization heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，multifunctional, with functions such as hardening and tempering, heat treatment, Forging heating, temper and anneal，customizable。

Continuous roll spheroidization heat treatment furnace

2、Continuous roll spheroidization heat treatment furnace function

Continuous roll spheroidization heat treatment furnaceit has the functions of Casting heating, normalizing, heat treatment, temper and anneal，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is an ideal choice for customers to buy Continuous roll spheroidization heat treatment furnace。

Continuous roll spheroidization heat treatment furnace

3、Continuous roll spheroidization heat treatment furnace use

The purpose of Continuous roll spheroidization heat treatment furnace is introduced as follows:

1. Metal forging heating

The Continuous roll spheroidization heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Continuous roll spheroidization heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The Continuous roll spheroidization heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Continuous roll spheroidization heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Continuous roll spheroidization heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Continuous roll spheroidization heat treatment furnace

4、Continuous roll spheroidization heat treatment furnace characteristics

The Continuous roll spheroidization heat treatment furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Easy to maintain

The structural design of the Continuous roll spheroidization heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

The combustion system and ventilation system of the Continuous roll spheroidization heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

5. Stable and reliable

The Continuous roll spheroidization heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Continuous roll spheroidization heat treatment furnace

5、Working principle of Continuous roll spheroidization heat treatment furnace

Continuous roll spheroidization heat treatment furnaceat runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the product looks atmospheric.，be loved by our customers.。

Continuous roll spheroidization heat treatment furnace

6、Continuous roll spheroidization heat treatment furnace price consultation

The Continuous roll spheroidization heat treatment furnace price is introduced as follows:

1. Cost input

One-combustion energy saving has a large production scale, strong manufacturing strength and high degree of automation in product production. In such a manufacturing environment, the cost of manufacturing Continuous roll spheroidization heat treatment furnace in One-combustion energy saving is greatly reduced.

2. specifications and models

The quotation of the same series of Continuous roll spheroidization heat treatment furnace with different specifications and models is different. The larger the model, the higher the product cost and the higher the overall quotation. On the contrary, the smaller the model, the lower the product cost and the lower the overall quotation.

3. Manufacturer's sales model

One-combustion energy saving has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

4. regional advantages

One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Continuous roll spheroidization heat treatment furnace.

5. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Continuous roll spheroidization heat treatment furnace price and service can meet the actual needs of customers.

Continuous roll spheroidization heat treatment furnace

Continuous roll spheroidization heat treatment furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it has the structure of Radiation chamber, ventilation system, convection chamber, recovery of waste heat and furnace chamber，it is widely used in Machinery manufacturing, material, surface treatment, machinery, shipping and other industries。