Introduction to Heat treatment roller bottom heating furnace, advantages, characteristics and principles of heating furnace

Heat treatment roller bottom heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks atmospheric.，it has the characteristics of Stable and reliable, energy-efficient, Easy to maintain, Easy to control and Easy to maintain，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，Simple structure and advanced technology.，Structure consists of combustor, furnace chamber, Radiation chamber, ventilation system, convection chamber and so on。

1、Brief introduction of Heat treatment roller bottom heating furnace

Heat treatment roller bottom heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Heat treatment roller bottom heating furnace

2、Heat treatment roller bottom heating furnace performance advantage

Heat treatment roller bottom heating furnaces have the following advantages.

1. Improve product quality

Because the Heat treatment roller bottom heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Extend the service life of equipment

The Heat treatment roller bottom heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Efficient combustion

The Heat treatment roller bottom heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Uniform heating

The Heat treatment roller bottom heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Multiple fuel options

Although the Heat treatment roller bottom heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Heat treatment roller bottom heating furnace

3、Heat treatment roller bottom heating furnace function

Heat treatment roller bottom heating furnaceit has the functions of Casting heating, temper, anneal, heat treatment and quench，it is mainly composed of recovery of waste heat, ventilation system, combustor, ventilation system and recovery of waste heat，This Heat treatment roller bottom heating furnaceThe structural design is more advanced and reasonable.，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，The price is low and affordable，reliable quality。

Heat treatment roller bottom heating furnace

4、Heat treatment roller bottom heating furnace application

Heat treatment roller bottom heating furnaces have the following purposes.

1. Improve production efficiency

The Heat treatment roller bottom heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal tempering

By properly heating and cooling the metal material, the Heat treatment roller bottom heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal heat treatment

In addition to forging heating, Heat treatment roller bottom heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal forging heating

The Heat treatment roller bottom heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Energy conservation and environmental protection

The Heat treatment roller bottom heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Heat treatment roller bottom heating furnace

5、Heat treatment roller bottom heating furnace video live broadcast

On-site aerial photography of Heat treatment roller bottom heating furnace。

Heat treatment roller bottom heating furnace

As you can see from the live video.，One-combustion energy saving It has a wide range of uses, and is often used inMetal tempering,Energy conservation and environmental protection,Metal melting and casting,Metal forging heating,Improve production efficiency and so on。

6、How much is the Heat treatment roller bottom heating furnace?

The Heat treatment roller bottom heating furnace price is introduced as follows:

1. region

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving detailed address:Zhangqiu Niu Yi Industrial Park, Ji 'nan City, Shandong Province, where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

2. Cost input

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of Heat treatment roller bottom heating furnace will also fluctuate to some extent.

3. Configuration difference

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Heat treatment roller bottom heating furnace are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Heat treatment roller bottom heating furnace, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

4. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Heat treatment roller bottom heating furnace have more or less differences in price.

5. company strength

The nature of the manufacturer can also greatly affect the price of the Heat treatment roller bottom heating furnace. General manufacturers are divided into direct sellers, agents and middlemen. If they are direct selling manufacturers, there are not too many intermediate links, and their sales prices are low.

Heat treatment roller bottom heating furnace

Heat treatment roller bottom heating furnaceat work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it is widely used inMachinery manufacturing,war industry,metallurgy,petroleum,building materials and other industries。