Introduction to Well type quenching and annealing furnace and heating furnace structure principle

Well type quenching and annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，has been favored by more and more customers.。

1、Brief introduction of Well type quenching and annealing furnace

Well type quenching and annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Widely used in Metal heat treatment, Metal tempering, Metal melting and casting, Energy conservation and environmental protection and Metal forging heating，the product looks atmospheric.，in the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，The overall structural design is simple, diverse and beautiful.，it has the structure of ventilation system, convection chamber, furnace chamber, ventilation system and ventilation system。

Well type quenching and annealing furnace

2、Well type quenching and annealing furnace video detail

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Well type quenching and annealing furnace

As you can see from the live video.，One-combustion energy saving it has the functions of hardening and tempering, anneal, normalizing, Forging heating and hardening and tempering。

3、Well type quenching and annealing furnace structure composition

The Well type quenching and annealing furnace has the following structure

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. Radiation chamber

The heat load of the main place for Well type quenching and annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Well type quenching and annealing furnace

4、Well type quenching and annealing furnace application

Well type quenching and annealing furnaces have the following purposes.

1. Improve production efficiency

The Well type quenching and annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal tempering

By properly heating and cooling the metal material, the Well type quenching and annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal heat treatment

In addition to forging heating, Well type quenching and annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Energy conservation and environmental protection

The Well type quenching and annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Well type quenching and annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Well type quenching and annealing furnace

5、Introduction of Well type quenching and annealing furnace characteristics

Well type quenching and annealing furnace has the following characteristics

1. Stable and reliable

The Well type quenching and annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Well type quenching and annealing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Easy to maintain

The structural design of the Well type quenching and annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Strong adaptability

The Well type quenching and annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Efficient heating

The Well type quenching and annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Well type quenching and annealing furnace

6、Well type quenching and annealing furnace quotation

The Well type quenching and annealing furnace price is introduced as follows:

1. company strength

Direct selling by manufacturers and sales by middlemen will also affect product prices. There are not too many links among direct selling products, so the cost required by manufacturers is low, and the price of Well type quenching and annealing furnace is low. Customers can also put products into production in advance. On the contrary, when purchasing products from middlemen, there are not only many links, but also the price of Well type quenching and annealing furnace is much higher, so customers should choose products directly sold by manufacturers when purchasing.

2. model

There are many product specifications and models in the market. The efficiency and power of different specifications and models are different, and the price is naturally different. Customers need to choose the appropriate specifications and models according to their own needs.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. Model size

Because there are many models of each product, different customers have different requirements for product performance, and the product specifications and models that are inevitably used will be different. Different models of the same product will lead to different prices.

5. mass discrepancy

Usually, the price of good quality products will be higher, because the product has higher technical content and more costs in raw materials and labor, but the performance of such products is higher and the profits will be higher. On the contrary, the price of ordinary quality products will be relatively lower, but the benefits will be correspondingly poor.

Well type quenching and annealing furnace

Well type quenching and annealing furnaceThe user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，the product looks beautiful.。