Introduction to Well type gas shielded quenching furnace, forging furnace specifications, model parameters

Well type gas shielded quenching furnaceIt is a forging heating device using gas as fuel.，the product looks beautiful.，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it has the characteristics of energy saving and environmental protection, energy-efficient, Strong adaptability, Easy to control and energy-efficient。The following is to introduce the Well type gas shielded quenching furnace:

1、Brief introduction of Well type gas shielded quenching furnace

Well type gas shielded quenching furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it is widely used in surface treatment, automobile, electron, machinery and material，The structural design is simple, novel and special.，it has the structure of furnace chamber, recovery of waste heat, recovery of waste heat, ventilation system and convection chamber。

Well type gas shielded quenching furnace

2、Well type gas shielded quenching furnace work site real shot

Various combinations of Well type gas shielded quenching furnace can meet the diverse needs of customers. The following are High definition real shot andthe product looks beautiful., which are trustworthy.。

Well type gas shielded quenching furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Introduction of Well type gas shielded quenching furnace characteristics

Well type gas shielded quenching furnace has the following characteristics

1. Strong adaptability

The Well type gas shielded quenching furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Stable and reliable

The Well type gas shielded quenching furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Well type gas shielded quenching furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

5. Easy to maintain

The structural design of the Well type gas shielded quenching furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Well type gas shielded quenching furnace

4、Well type gas shielded quenching furnace application

Well type gas shielded quenching furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Well type gas shielded quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Improve production efficiency

The Well type gas shielded quenching furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Well type gas shielded quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Well type gas shielded quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Well type gas shielded quenching furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Well type gas shielded quenching furnace

5、Well type gas shielded quenching furnace explanation video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Well type gas shielded quenching furnace production process and production site, and gain favorable comments and recognition from customers.。

Well type gas shielded quenching furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd multifunctional, with functions such as Casting heating, temper, quench, hardening and tempering and Forging heating。

6、Why choose One-combustion energy saving?

Choosing a suitable Well type gas shielded quenching furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Well type gas shielded quenching furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Well type gas shielded quenching furnaceenergy saving and environmental protection,Easy to maintain,Stable and reliable,Strong adaptability,Easy to control，at work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it is usually composed of furnace chamber, ventilation system, combustor, Radiation chamber and recovery of waste heat，This Well type gas shielded quenching furnaceThe overall structural design is simple, diverse and beautiful.。