What is a Well type hot-dip galvanizing furnace? Introduction to the advantages and characteristics of heating furnace functions

Well type hot-dip galvanizing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，It is mostly used in Improve production efficiency, Energy conservation and environmental protection, Improve production efficiency, Metal heat treatment, Energy conservation and environmental protection, Metal melting and casting and so on，usually used in pharmacy, Machinery manufacturing, electron, machinery, aerospace and other fields，customizable。

1、Brief introduction of Well type hot-dip galvanizing furnace

Well type hot-dip galvanizing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，was developed and designed by One-combustion energy saving。

Well type hot-dip galvanizing furnace

2、Well type hot-dip galvanizing furnace function

Well type hot-dip galvanizing furnaceit has the functions of Casting heating, quench, heat treatment, normalizing and anneal。

Well type hot-dip galvanizing furnace

3、Well type hot-dip galvanizing furnace characteristics

The Well type hot-dip galvanizing furnace features are as follows:

1. Efficient heating

The Well type hot-dip galvanizing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Easy to control

The combustion system and ventilation system of the Well type hot-dip galvanizing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Well type hot-dip galvanizing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Strong adaptability

The Well type hot-dip galvanizing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Stable and reliable

The Well type hot-dip galvanizing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Well type hot-dip galvanizing furnace

4、Well type hot-dip galvanizing furnace application

Well type hot-dip galvanizing furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Well type hot-dip galvanizing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal tempering

By properly heating and cooling the metal material, the Well type hot-dip galvanizing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Energy conservation and environmental protection

The Well type hot-dip galvanizing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal forging heating

The Well type hot-dip galvanizing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Well type hot-dip galvanizing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Well type hot-dip galvanizing furnace

5、Well type hot-dip galvanizing furnace real shot picture

Well type hot-dip galvanizing furnace complete specifications and models, the product looks beautiful.。

Well type hot-dip galvanizing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、How much is the Well type hot-dip galvanizing furnace?

The Well type hot-dip galvanizing furnace price is introduced as follows:

1. Brand strength

At present, there are various brands of Well type hot-dip galvanizing furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Well type hot-dip galvanizing furnace are different.

2. geographical position

One-combustion energy savingJinan, the transportation is convenient, and the corresponding cost of transporting Well type hot-dip galvanizing furnace is low, which reduces the cost of selling Well type hot-dip galvanizing furnace by manufacturers, and the price will also decrease.

3. raw material

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

4. product costs

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of Well type hot-dip galvanizing furnace will also fluctuate to some extent.

5. Self quality

The selling price of excellent quality products is also high, so users should also consider the quality and price of products comprehensively when purchasing products, so as to buy products with high cost performance.

Well type hot-dip galvanizing furnace

Well type hot-dip galvanizing furnacemultifunctional, with functions such as hardening and tempering, anneal, temper, heat treatment and quench，is a Well type hot-dip galvanizing furnace，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.。