Introduction to Pit type tempering furnace and Forging furnace working principle

Pit type tempering furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，widely used in automobile, automobile, electron, machinery, heat treatment and other fields，the product looks beautiful.，is a common Pit type tempering furnace，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.。

1、Brief introduction of Pit type tempering furnace

Pit type tempering furnaceIt is a forging heating device using gas as fuel.，multifunctional, with functions such as heat treatment, Forging heating, hardening and tempering, heat treatment and anneal。

Pit type tempering furnace

2、Functional advantages of Pit type tempering furnace

Pit type tempering furnaces have the following advantages.

1. Improve product quality

Because the Pit type tempering furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Pit type tempering furnace can significantly reduce energy consumption, thus reducing operating costs.

3. Wide application range

The Pit type tempering furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Uniform heating

The Pit type tempering furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Rapid temperature rise

The Pit type tempering furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Pit type tempering furnace

3、Pit type tempering furnace video detail

On-site aerial photography of Pit type tempering furnace。

Pit type tempering furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd is a kind of high quality and low price Pit type tempering furnace。

4、Functional advantages of Pit type tempering furnace

Pit type tempering furnaces have the following advantages.

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Multiple fuel options

Although the Pit type tempering furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Efficient combustion

The Pit type tempering furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. easy to operate

The operation interface of the Pit type tempering furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Pit type tempering furnace

5、Pit type tempering furnace function

Pit type tempering furnacemultifunctional, with functions such as normalizing, Forging heating, quench, hardening and tempering and Casting heating，is a popular Pit type tempering furnace，it has the characteristics of Strong adaptability, Easy to control, energy-efficient, Easy to maintain and Stable and reliable，it is mainly composed of convection chamber, combustor, Radiation chamber, recovery of waste heat and furnace chamber，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Pit type tempering furnace

6、Pit type tempering furnace price consultation

The Pit type tempering furnace price is introduced as follows:

1. regional advantages

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving the site is located at:Shandong(Province), where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

2. raw material

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

3. technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

4. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Pit type tempering furnace price and service can meet the actual needs of customers.

5. model

One-combustion energy saving Pit type tempering furnace has various specifications and models, and the prices of different specifications and models are also different. The main difference lies in the different technologies used in the products and the different manufacturing costs. One-combustion energy saving We will regularly offer preferential prices for products of different specifications and models, and will combine the actual purchasing needs of customers to give more benefits, so that complete procurement can get more benefits

Pit type tempering furnace

Pit type tempering furnaceit is widely used in Machinery manufacturing, pharmacy, shipping, Household necessities and surface treatment，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。