Introduction to Medium temperature well quenching furnace, heating furnace advantages, characteristics and principles

Medium temperature well quenching furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。The following is to introduce the Medium temperature well quenching furnace:

1、Brief introduction of Medium temperature well quenching furnace

Medium temperature well quenching furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it is an ideal choice for customers to buy Medium temperature well quenching furnace。

Medium temperature well quenching furnace

2、Medium temperature well quenching furnace structure composition

The Medium temperature well quenching furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for Medium temperature well quenching furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Medium temperature well quenching furnace

3、Advantages of Medium temperature well quenching furnace principle

Medium temperature well quenching furnaceat runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it is mainly composed of Radiation chamber, recovery of waste heat, furnace chamber, ventilation system and combustor。

Medium temperature well quenching furnace

4、Medium temperature well quenching furnace application

Medium temperature well quenching furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Medium temperature well quenching furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal forging heating

The Medium temperature well quenching furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Energy conservation and environmental protection

The Medium temperature well quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Medium temperature well quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Medium temperature well quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Medium temperature well quenching furnace

5、Medium temperature well quenching furnace price concessions

The Medium temperature well quenching furnace price is introduced as follows:

1. market factors

This is one of the external factors that lead to price fluctuation. Only after fully understanding the market can we make a reasonable decision. One-combustion energy saving has a deep understanding of this factor, so the price of our Medium temperature well quenching furnace is more reasonable.

2. Product technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

3. cost of production

The manufacturer has a fixed raw material supplier, so that the raw material price given by the raw material supplier to the manufacturer will be lower, the raw material cost invested by the manufacturer will be reduced, and the price of the Medium temperature well quenching furnace will also be reduced.

4. Sales model

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Medium temperature well quenching furnace is low.

5. Company size

At present, there are many manufacturers of products on the market, some of which belong to direct selling manufacturers and some belong to middlemen. Direct selling manufacturers will cost less than middlemen, so the quotation for products will be lower. Therefore, it is recommended that customers buy products from direct selling manufacturers of Medium temperature well quenching furnace. In addition, even direct selling manufacturers have different capital status, strength level and technology, and the quotation for Medium temperature well quenching furnace will be different.

Medium temperature well quenching furnace

6、One-combustion energy saving service

One-combustion energy saving adheres to the service concept of "being honest, doing things according to rules, pioneering and innovating, mutual benefit and win-win", and serves every customer wholeheartedly to create quality products and intimate services for customers.。

One-combustion energy saving

Medium temperature well quenching furnaceit has the characteristics of energy-efficient, Stable and reliable, Easy to control, Easy to maintain and Strong adaptability，multifunctional, with functions such as Forging heating, normalizing, anneal, quench and Casting heating，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.。