What is a Double door well type heat treatment furnace? heating furnace specifications, models, and parameters

Double door well type heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it mainly includes ventilation system, furnace chamber, convection chamber, recovery of waste heat and furnace chamber，can be customized according to user's needs.。The following is to introduce the Double door well type heat treatment furnace:

1、Brief introduction of Double door well type heat treatment furnace

Double door well type heat treatment furnaceIt is a forging heating device using gas as fuel.，the product looks beautiful.，the main features are Stable and reliable, energy-efficient, energy saving and environmental protection, Stable and reliable and Strong adaptability，the principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is carefully developed by One-combustion energy saving combined with advanced technology。

Double door well type heat treatment furnace

2、Double door well type heat treatment furnace function

Double door well type heat treatment furnaceit has the functions of temper, heat treatment, Casting heating, quench and quench，the product looks atmospheric.，It is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，be loved by our customers.。

Double door well type heat treatment furnace

3、Double door well type heat treatment furnace application

Double door well type heat treatment furnaces have the following purposes.

1. Improve production efficiency

The Double door well type heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Double door well type heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal heat treatment

In addition to forging heating, Double door well type heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Double door well type heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Double door well type heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Double door well type heat treatment furnace

4、Functional advantages of Double door well type heat treatment furnace

Double door well type heat treatment furnaces have the following advantages.

1. Intelligent control

The Double door well type heat treatment furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Rapid temperature rise

The Double door well type heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. Wide application range

The Double door well type heat treatment furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Extend the service life of equipment

The Double door well type heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Improve product quality

Because the Double door well type heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Double door well type heat treatment furnace

5、Structural advantages of Double door well type heat treatment furnace

The Double door well type heat treatment furnace has the following structure

1. Radiation chamber

The heat load of the main place for Double door well type heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. furnace chamber

A space for holding metallic materials for heating.

Double door well type heat treatment furnace

6、How much is the Double door well type heat treatment furnace?

The Double door well type heat treatment furnace price is introduced as follows:

1. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Double door well type heat treatment furnace have more or less differences in price.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. Company size

There are many Double door well type heat treatment furnace manufacturers on the market. Different manufacturers spend different costs, such as material costs, labor costs, manufacturing costs, etc., and their products are quoted differently.

4. model

Because there are many specifications and models of Double door well type heat treatment furnace, the quotations of Double door well type heat treatment furnace with different specifications and models are different.

5. Overall configuration

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

Double door well type heat treatment furnace

Double door well type heat treatment furnaceat work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，is a popular Double door well type heat treatment furnace。