What is a Step furnace denitrification? Introduction to the advantages and characteristics of the SCR denitration system

Step furnace denitrificationthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Step furnace denitrification technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Step furnace denitrification technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Step furnace denitrification can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Step furnace denitrification technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Step furnace denitrification technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Technology has been developed and applied for many years, and it is mature and stable. The Step furnace denitrification has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Step furnace denitrification technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.。

1、Brief introduction of Step furnace denitrification

Step furnace denitrificationthe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，it has the functions of environmental protection, Promote sustainable development, Promote sustainable development, Improve working conditions and environmental protection，the product looks atmospheric.，customizable。

Step furnace denitrification

2、Structural characteristics of Step furnace denitrification

The Step furnace denitrification has the following structure

1. Reactor

It is the core component of Step furnace denitrification technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

2. control system

The whole Step furnace denitrification is automatically controlled, including the adjustment of reducing agent supply, flue gas flow and temperature, so as to ensure the stable operation of the system and achieve the expected denitrification effect.

3. Flue gas mixing and distribution

The mixed reducing agent and flue gas are fully mixed in the mixing tube and evenly distributed to the catalyst reactor through the distribution system.

4. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

5. Temperature control and monitoring

The temperature in the catalyst reactor is maintained within the optimal reaction temperature range through the temperature control and monitoring system.

Step furnace denitrification

3、On-site real shot of Step furnace denitrification

The Step furnace denitrification has a beautiful appearance and atmosphere for our customers' reference.。

Step furnace denitrification

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Video analysis of Step furnace denitrification

On-site aerial photography of Step furnace denitrification。

Step furnace denitrification

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the product looks beautiful.。

5、How much is the Step furnace denitrification?

The Step furnace denitrification price is introduced as follows:

1. Quality advantages and disadvantages

Quality is an important and fundamental factor that affects the price of Step furnace denitrification. In the final analysis, its price depends on its quality. Usually, Step furnace denitrification with better quality will cost more, and such products have better effects, longer service life and more advanced technology. A Step furnace denitrification with a relatively general quality will cost less, have a shorter service life and have a relatively general use effect.

2. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Step furnace denitrification manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Step furnace denitrification price can meet the purchasing needs of customers.

3. specifications and models

The quotation of the same series of Step furnace denitrification with different specifications and models is different. The larger the model, the higher the product cost and the higher the overall quotation. On the contrary, the smaller the model, the lower the product cost and the lower the overall quotation.

4. Reasonable cost

The cost of manufacturing Step furnace denitrification varies from manufacturer to manufacturer. The higher the cost of manufacturing products, the higher the product price will be. On the other hand, the lower the production cost, the lower the product price, but the quality of products with high production cost is guaranteed, which can reduce the maintenance cost of customers.

5. market competition

Market supply and demand is the main objective factor to determine the price, and the imbalance between supply and demand affects the price change. Generally speaking, when the Step furnace denitrification market is in short supply, its price will increase relatively; On the contrary, when the supply exceeds the demand, it also indicates that the competition among manufacturers is fierce. In order to better improve the visibility of manufacturers and occupy a more favorable market position, manufacturers will generally lower their prices appropriately; Only when the market supply and demand reach a balanced state can its normal price be realized.

Step furnace denitrification

6、One-combustion energy saving delivery site

You can buy Step furnace denitrification according to your needs and show you product videos.。

Step furnace denitrification

As you can see from the live video.One-combustion energy saving The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Step furnace denitrification technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Step furnace denitrification technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、Technology has been developed and applied for many years, and it is mature and stable. The Step furnace denitrification has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Step furnace denitrification technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Step furnace denitrification technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Step furnace denitrification can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.。

Step furnace denitrificationMainly used forPromote sustainable development,environmental protection,Meet the requirements of environmental protection,Flue gas denitrification andenvironmental protection，at runtime,Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.。