What is a Denitrification of flue gas from strip heating furnace? How much is the price of the SCR denitration?

Denitrification of flue gas from strip heating furnacedelective catalytic reduction technology is an efficient flue gas denitrification technology.，the main features are High denitration efficiency, Strong adaptability, energy saving and environmental protection, Environmental protection and pollution-free and Strong adaptability，the principle is simple.Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.，it is widely used in building materials, coal-fired power station, iron and steel plant, metallurgy and building materials，generally, it is composed of Catalyst supply system, Temperature control and monitoring system, control system, Catalyst reactor, Flue gas mixing and distribution system and other major components，This Denitrification of flue gas from strip heating furnaceSimple structure and reliable operation.。

1、Brief introduction of Denitrification of flue gas from strip heating furnace

Denitrification of flue gas from strip heating furnaceis an efficient, stable and environment-friendly flue gas denitrification technology.，Mainly used forFlue gas denitrification,Flue gas denitrification,Promote sustainable development,environmental protection andMeet the requirements of environmental protection，the product looks atmospheric.，support customization。

Denitrification of flue gas from strip heating furnace

2、Denitrification of flue gas from strip heating furnace use

Denitrification of flue gas from strip heating furnaceWidely used inImprove product quality,Promote sustainable development,Improve product quality,environmental protection,Meet the requirements of environmental protection and so on，it is usually composed of Flue gas mixing and distribution system, Temperature control and monitoring system, control system, Catalyst supply system and Catalyst reactor，the advantage is The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Denitrification of flue gas from strip heating furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Denitrification of flue gas from strip heating furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification of flue gas from strip heating furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Denitrification of flue gas from strip heating furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Denitrification of flue gas from strip heating furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Denitrification of flue gas from strip heating furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Denitrification of flue gas from strip heating furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.。

Denitrification of flue gas from strip heating furnace

3、Denitrification of flue gas from strip heating furnace real shot picture

Various styles and styles of Denitrification of flue gas from strip heating furnace, complete models, for you to choose at will.。

Denitrification of flue gas from strip heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Denitrification of flue gas from strip heating furnace advantage

Denitrification of flue gas from strip heating furnaces have the following advantages.

1. Mature and stable technology

Denitrification of flue gas from strip heating furnace technology has been developed and applied for many years, and the technology is mature and stable. The Denitrification of flue gas from strip heating furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Denitrification of flue gas from strip heating furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.

2. Intelligent control and convenience of operation

The Denitrification of flue gas from strip heating furnace has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Denitrification of flue gas from strip heating furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

3. Environmental friendliness

The by-products produced by Denitrification of flue gas from strip heating furnace technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Denitrification of flue gas from strip heating furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

4. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the Denitrification of flue gas from strip heating furnace technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification of flue gas from strip heating furnace technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

5. Wide applicability

Denitrification of flue gas from strip heating furnace technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Denitrification of flue gas from strip heating furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.

Denitrification of flue gas from strip heating furnace

5、Introduction of Denitrification of flue gas from strip heating furnace characteristics

Denitrification of flue gas from strip heating furnace has the following characteristics

1. selectivity

Under the action of catalyst, the reducing agent mainly reacts with NOx selectively, but less with other components (such as oxygen) in flue gas, thus reducing unnecessary consumption.

2. Stable operation and stability

The Denitrification of flue gas from strip heating furnace technology runs stably and can meet the requirements of flue gas treatment under different working conditions.

3. High denitration efficiency

The denitration efficiency of Denitrification of flue gas from strip heating furnace technology can reach more than 90%, and it is a widely used post-combustion denitration technology at present.

4. Strong adaptability

Denitrification of flue gas from strip heating furnace technology can meet the needs of flue gas denitrification under different working conditions and has a wide range of applications.

5. Small secondary pollution

The by-products produced in the Denitrification of flue gas from strip heating furnace opening process are nitrogen and water vapor, and there is no secondary pollution problem.

Denitrification of flue gas from strip heating furnace

6、How much is the Denitrification of flue gas from strip heating furnace?

The Denitrification of flue gas from strip heating furnace price is introduced as follows:

1. market supply and demand

With the increasingly fierce competition of Denitrification of flue gas from strip heating furnace, market factors have a certain influence on the price of Denitrification of flue gas from strip heating furnace. When the demand in the market increases and the supply remains unchanged, the price will rise. On the contrary, the price will fall. When there is an increase in supply and the demand remains unchanged, the price will rise, on the contrary, the price will fall.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. Company size

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

4. Product technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

5. marketing channel

If there is no middleman to earn the difference, then the Denitrification of flue gas from strip heating furnace price will naturally decrease. One-combustion energy saving adopts the business model of "self-production and self-marketing" to sell products, thus realizing "one-on-one" sales, so the comprehensive price of our products is relatively high.

Denitrification of flue gas from strip heating furnace

Denitrification of flue gas from strip heating furnacethe product looks beautiful.，that is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.。