Introduction to Dual car industrial tempering furnace, advantages, characteristics and principles of forging furnace

Dual car industrial tempering furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，multifunctional, with functions such as anneal, hardening and tempering, Forging heating, quench and temper。

1、Brief introduction of Dual car industrial tempering furnace

Dual car industrial tempering furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，Commonly used inMetal melting and casting,Improve production efficiency,Energy conservation and environmental protection,Metal tempering,Improve production efficiency and so on。

Dual car industrial tempering furnace

2、Advantages of Dual car industrial tempering furnace principle

Dual car industrial tempering furnacein the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

Dual car industrial tempering furnace

3、Dual car industrial tempering furnace characteristics

The Dual car industrial tempering furnace features are as follows:

1. Efficient heating

The Dual car industrial tempering furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Easy to maintain

The structural design of the Dual car industrial tempering furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Dual car industrial tempering furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Strong adaptability

The Dual car industrial tempering furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Easy to control

The combustion system and ventilation system of the Dual car industrial tempering furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Dual car industrial tempering furnace

4、Introduction of Dual car industrial tempering furnace characteristics

Dual car industrial tempering furnace has the following characteristics

1. Stable and reliable

The Dual car industrial tempering furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Dual car industrial tempering furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Easy to maintain

The structural design of the Dual car industrial tempering furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Dual car industrial tempering furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

5. Strong adaptability

The Dual car industrial tempering furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Dual car industrial tempering furnace

5、Dual car industrial tempering furnace function

Dual car industrial tempering furnaceit has the functions of Casting heating, heat treatment, hardening and tempering, normalizing and anneal，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，super quality and competitive price。

Dual car industrial tempering furnace

Dual car industrial tempering furnaceenergy-efficient,energy saving and environmental protection,Strong adaptability,Stable and reliable,Easy to control，It is a product series that integrates Metal forging heating, Energy conservation and environmental protection, Metal heat treatment, Metal melting and casting and Metal tempering。