What is a Pull rod annealing industrial furnace? Introduction to the principle of heating furnace structure

Pull rod annealing industrial furnaceIt is a forging heating device using gas as fuel.，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，multifunctional, with functions such as Forging heating, heat treatment, anneal, quench and heat treatment。

1、Brief introduction of Pull rod annealing industrial furnace

Pull rod annealing industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the main features are energy-efficient, Easy to control, energy-efficient, Easy to control and Easy to maintain，The overall structural design is relatively simple and compact.，it is mainly composed of furnace chamber, Radiation chamber, ventilation system, ventilation system and recovery of waste heat，the product looks beautiful.，support customization。

Pull rod annealing industrial furnace

2、Pull rod annealing industrial furnace function

Pull rod annealing industrial furnaceit has the functions of temper, Casting heating, anneal, normalizing and Forging heating，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.。

Pull rod annealing industrial furnace

3、Pull rod annealing industrial furnace video live broadcast

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Pull rod annealing industrial furnace production process and production site, and gain favorable comments and recognition from customers.。

Pull rod annealing industrial furnace

As you can see from the live video.，One-combustion energy saving it has been widely used in building materials, pharmacy, automobile, shipping, Household necessities and other industries。

4、Pull rod annealing industrial furnace application

Pull rod annealing industrial furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Pull rod annealing industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal forging heating

The Pull rod annealing industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Pull rod annealing industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal heat treatment

In addition to forging heating, Pull rod annealing industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Improve production efficiency

The Pull rod annealing industrial furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Pull rod annealing industrial furnace

5、How much is the Pull rod annealing industrial furnace?

The Pull rod annealing industrial furnace price is introduced as follows:

1. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Pull rod annealing industrial furnace have more or less differences in price.

2. market supply and demand

If there is a large demand for Pull rod annealing industrial furnace in the market, the price of products will naturally be high. On the other hand, if the supply of this equipment exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will be very low.

3. manufacturing cost

When the Pull rod annealing industrial furnace is manufactured, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

4. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Pull rod annealing industrial furnace

6、One-combustion energy saving's after-sales service

One-combustion energy saving manufacturer services include three aspects: pre-sale, in-sale and after-sale. Each stage is closely connected with each other, sincerely serving each customer, focusing on customer needs, providing customers with product knowledge training and regularly repairing products for customers, etc., which has been appreciated by new and old customers.。

One-combustion energy saving

Pull rod annealing industrial furnacethe product looks beautiful.，at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it mainly includes furnace chamber, convection chamber, ventilation system, combustor and Radiation chamber。