Introduction to Isothermal normalizing heating furnace, forging furnace advantages, characteristics and principles

Isothermal normalizing heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the functions of temper, Forging heating, quench, normalizing and heat treatment，The overall structural design is simple and novel.，structure mainly includes: convection chamber, combustor, furnace chamber, ventilation system, furnace chamber and so on。

1、Brief introduction of Isothermal normalizing heating furnace

Isothermal normalizing heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Isothermal normalizing heating furnace

2、Isothermal normalizing heating furnace performance advantage

Isothermal normalizing heating furnaces have the following advantages.

1. Efficient combustion

The Isothermal normalizing heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Extend the service life of equipment

The Isothermal normalizing heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Intelligent control

The Isothermal normalizing heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. easy to operate

The operation interface of the Isothermal normalizing heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Rapid temperature rise

The Isothermal normalizing heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Isothermal normalizing heating furnace

3、Introduction of Isothermal normalizing heating furnace characteristics

Isothermal normalizing heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Isothermal normalizing heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Isothermal normalizing heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Stable and reliable

The Isothermal normalizing heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Isothermal normalizing heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Isothermal normalizing heating furnace

4、Structural characteristics of Isothermal normalizing heating furnace

The Isothermal normalizing heating furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Radiation chamber

The heat load of the main place for Isothermal normalizing heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Isothermal normalizing heating furnace

5、Isothermal normalizing heating furnace function

Isothermal normalizing heating furnacemultifunctional, with functions such as temper, anneal, Casting heating, hardening and tempering and heat treatment，is a Isothermal normalizing heating furnace，in the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，It has the functions of Metal tempering, Energy conservation and environmental protection, Metal melting and casting, Improve production efficiency and Metal forging heating，is a Isothermal normalizing heating furnace newly developed by One-combustion energy saving。

Isothermal normalizing heating furnace

6、How much is the Isothermal normalizing heating furnace?

The Isothermal normalizing heating furnace price is introduced as follows:

1. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

2. market demand

Market change is one of the factors that affect the price range greatly. Market change is unstable, but there are certain rules to follow. Market change is caused by other factors, such as economic instability, competition among manufacturers and too big difference between supply and demand. These factors are the core reasons that cause the market to fluctuate greatly, and then it will have a bad impact on prices.

3. Product technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

4. model

Because of different models, the basic configuration of the product is different, so its cost input will be different. The higher the cost input, the higher the market sales price. Generally speaking, the large-scale Isothermal normalizing heating furnace has excellent performance, so it also makes the sales price high.

5. regional difference

Different provinces and regions have different consumption levels, different market positioning and different prices.

Isothermal normalizing heating furnace

Isothermal normalizing heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，It can be used for Metal forging heating, Improve production efficiency, Metal melting and casting, Metal heat treatment, Metal tempering, Energy conservation and environmental protection and so on。