Brief introduction and advantages of Environmental protection chain furnace

Environmental protection chain furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it is mainly composed of combustor, Radiation chamber, ventilation system, recovery of waste heat and convection chamber，This productThe overall structural design is relatively simple and compact.，it has the functions of temper, quench, heat treatment, Forging heating and hardening and tempering。The following is to introduce the Environmental protection chain furnace:

1、Brief introduction of Environmental protection chain furnace

Environmental protection chain furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Widely used inMetal heat treatment,Energy conservation and environmental protection,Metal tempering,Metal melting and casting,Improve production efficiency and so on，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，is a kind of Environmental protection chain furnace manufactured by One-combustion energy saving。

Environmental protection chain furnace

2、Environmental protection chain furnace use

The purpose of Environmental protection chain furnace is introduced as follows:

1. Energy conservation and environmental protection

The Environmental protection chain furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Environmental protection chain furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Environmental protection chain furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Environmental protection chain furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal heat treatment

In addition to forging heating, Environmental protection chain furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Environmental protection chain furnace

3、Video analysis of Environmental protection chain furnace

You can buy Environmental protection chain furnace according to your needs and show you product videos.。

Environmental protection chain furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd multifunctional, with functions such as anneal, temper, Casting heating, hardening and tempering and heat treatment。

4、Advantages of Environmental protection chain furnace principle

Environmental protection chain furnaceThe high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，It is a forging heating device using gas as fuel.，it has the characteristics of energy saving and environmental protection, Easy to control, Stable and reliable, Easy to maintain and energy saving and environmental protection，it is an ideal choice for customers to buy Environmental protection chain furnace。

Environmental protection chain furnace

5、Structural characteristics of Environmental protection chain furnace

The Environmental protection chain furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Radiation chamber

The heat load of the main place for Environmental protection chain furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Environmental protection chain furnace

Environmental protection chain furnacethe product looks beautiful.，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，Simple structure and advanced technology.，generally, it is composed of furnace chamber, ventilation system, recovery of waste heat, furnace chamber, ventilation system and other major components。