Brief introduction and functional advantages of Stepped trolley forging furnace
Stepped trolley forging furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.,It has the functions of Metal tempering, Metal forging heating, Energy conservation and environmental protection, Energy conservation and environmental protection and Metal forging heating。The following is to introduce the Stepped trolley forging furnace:
1、Brief introduction of Stepped trolley forging furnace
Stepped trolley forging furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.,it is mainly composed of convection chamber, recovery of waste heat, Radiation chamber, ventilation system and combustor,productThe structural design is simple, novel and special.,is a Stepped trolley forging furnace,Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.,has been favored by more and more customers.。
Stepped trolley forging furnace
2、Stepped trolley forging furnace structure
The Stepped trolley forging furnace structure is introduced as follows:
- furnace chamber
- Waste heat recovery system
- combustor
- convection chamber
- ventilation system
A space for holding metallic materials for heating.
Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.
The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.
The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.
Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.
Stepped trolley forging furnace
3、Introduction of Stepped trolley forging furnace characteristics
Stepped trolley forging furnace has the following characteristics
- Easy to maintain
- Efficient heating
- Easy to maintain
- energy saving and environmental protection
- Strong adaptability
The structural design of the Stepped trolley forging furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.
The Stepped trolley forging furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.
The structural design of the Stepped trolley forging furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.
Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Stepped trolley forging furnace further improves energy utilization efficiency and reduces energy consumption and emissions.
The Stepped trolley forging furnace is suitable for forging and heating of various metal materials and has a wide range of applications.
Stepped trolley forging furnace
4、Stepped trolley forging furnace use
The purpose of Stepped trolley forging furnace is introduced as follows:
- Metal heat treatment
- Metal forging heating
- Energy conservation and environmental protection
- Metal heat treatment
- Metal tempering
In addition to forging heating, Stepped trolley forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.
The Stepped trolley forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.
The Stepped trolley forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.
In addition to forging heating, Stepped trolley forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.
By properly heating and cooling the metal material, the Stepped trolley forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.
Stepped trolley forging furnace
5、Stepped trolley forging furnace explanation video
The following is the live video of Stepped trolley forging furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability. of One-combustion energy savingStepped trolley forging furnace.。
Stepped trolley forging furnace
As you can see from the live video.,Shandong yiran energy-saving environment protection co., ltd at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。
6、Stepped trolley forging furnace function
Stepped trolley forging furnacemultifunctional, with functions such as Casting heating, normalizing, heat treatment, hardening and tempering and Forging heating,the principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.,the product looks atmospheric.。
Stepped trolley forging furnace
Stepped trolley forging furnaceWidely used in Metal heat treatment, Metal melting and casting, Metal tempering, Improve production efficiency and Energy conservation and environmental protection,Strong adaptability,Easy to control,Easy to maintain,Strong adaptability,Easy to control,the product looks beautiful.。
Related recommendation
-
Introduction to Double through quenching furnace and forging furnace working principle
2025-5-27 -
Introduction to Well type quenching heating furnace, introduction to Forging furnace function advantages and characteristics
2025-5-27 -
Brief introduction of Forging steel heating furnace
2025-6-18 -
What is a Fully automatic annealing industrial furnace? Introduction to the principle of Forging furnace structure
2025-5-27 -
Introduction to Electric heating and heat treatment furnace, how much is the price of the Trolley electric heating furnace?
2025-5-27 -
Introduction to Heating furnace chamber type and forging furnace working principle
2025-5-27 -
Introduction to SCR low-temperature catalytic absorption denitrification system, SCR denitration system specifications, model parameters
2025-5-27 -
Introduction to Electric low-temperature tempering furnace, Trolley electric furnace specifications, model parameters
2025-5-27 -
Introduction to Ceramic fiber resistance furnace and Trolley resistance furnace structure principle
2025-5-27 -
What is a Brass heating furnace? Introduction to the principle of forging furnace structure
2025-5-27