Brief introduction and advantages of Combination walking furnace

Combination walking furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，It is mostly used in Metal heat treatment, Metal tempering, Energy conservation and environmental protection, Metal forging heating, Metal tempering, Metal heat treatment and so on，the main features are energy-efficient, Stable and reliable, Stable and reliable, Strong adaptability and energy-efficient，was developed and designed by One-combustion energy saving。

1、Brief introduction of Combination walking furnace

Combination walking furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。

Combination walking furnace

2、Combination walking furnace characteristics

The Combination walking furnace features are as follows:

1. Efficient heating

The Combination walking furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Easy to maintain

The structural design of the Combination walking furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Combination walking furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Strong adaptability

The Combination walking furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Combination walking furnace

3、Combination walking furnace field real shot

The following picture is a panoramic shot of One-combustion energy saving Combination walking furnace,the product looks beautiful., which is trustworthy.。

Combination walking furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Combination walking furnace application

Combination walking furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Combination walking furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal heat treatment

In addition to forging heating, Combination walking furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Combination walking furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal tempering

By properly heating and cooling the metal material, the Combination walking furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal heat treatment

In addition to forging heating, Combination walking furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Combination walking furnace

5、Functional advantages of Combination walking furnace

Combination walking furnaces have the following advantages.

1. Rapid temperature rise

The Combination walking furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Intelligent control

The Combination walking furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Efficient combustion

The Combination walking furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Uniform heating

The Combination walking furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Combination walking furnace can significantly reduce energy consumption, thus reducing operating costs.

Combination walking furnace

6、One-combustion energy saving's strength

The company has many years of Combination walking furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Combination walking furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，Easy to control,energy saving and environmental protection,Easy to maintain,Stable and reliable,energy-efficient。