What is a Natural gas regenerative chamber heating furnace? Introduction to the advantages and characteristics of the heating furnace

Natural gas regenerative chamber heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。The following is to introduce the Natural gas regenerative chamber heating furnace:

1、Brief introduction of Natural gas regenerative chamber heating furnace

Natural gas regenerative chamber heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Natural gas regenerative chamber heating furnace

2、Structural characteristics of Natural gas regenerative chamber heating furnace

The Natural gas regenerative chamber heating furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Natural gas regenerative chamber heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Natural gas regenerative chamber heating furnace

3、Physical picture of Natural gas regenerative chamber heating furnace

Provide a variety of specifications and models of Natural gas regenerative chamber heating furnace, high-definition picture list.。

Natural gas regenerative chamber heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Natural gas regenerative chamber heating furnace characteristics

The Natural gas regenerative chamber heating furnace features are as follows:

1. Easy to maintain

The structural design of the Natural gas regenerative chamber heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Efficient heating

The Natural gas regenerative chamber heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Strong adaptability

The Natural gas regenerative chamber heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Stable and reliable

The Natural gas regenerative chamber heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Natural gas regenerative chamber heating furnace

5、Advantages of Natural gas regenerative chamber heating furnace principle

Natural gas regenerative chamber heating furnaceat work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，be loved by our customers.。

Natural gas regenerative chamber heating furnace

6、How much is the Natural gas regenerative chamber heating furnace?

The Natural gas regenerative chamber heating furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. Manufacturer's strength

One-combustion energy saving is a self-produced and self-sold Natural gas regenerative chamber heating furnace, and has rich experience in the production and manufacturing of Natural gas regenerative chamber heating furnace. In the process of production and manufacturing, there is less waste of resources, and the corresponding product prices are also low.

3. type of operation

If there is no middleman to earn the difference, then the Natural gas regenerative chamber heating furnace price will naturally decrease. One-combustion energy saving adopts the business model of "self-production and self-marketing" to sell products, thus realizing "one-on-one" sales, so the comprehensive price of our products is relatively high.

4. Brand strength

At present, there are various brands of Natural gas regenerative chamber heating furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Natural gas regenerative chamber heating furnace are different.

5. regional advantages

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

Natural gas regenerative chamber heating furnace

Natural gas regenerative chamber heating furnacegenerally, it is composed of ventilation system, recovery of waste heat, recovery of waste heat, furnace chamber, combustor and other major components，productThe overall structural design is simple, diverse and beautiful.，it is widely used in pharmacy, metallurgy, light industry, Household necessities, shipping and other industries，is a common Natural gas regenerative chamber heating furnace。