Introduction of Split type heating furnace

Split type heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the product looks beautiful.，the product looks atmospheric.，it has the functions of Casting heating, normalizing, hardening and tempering, heat treatment and anneal，usually used in automobile, material, heat treatment, electron, metallurgy and other fields。The following is to introduce the Split type heating furnace:

1、Brief introduction of Split type heating furnace

Split type heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it is an ideal choice for customers to buy Split type heating furnace。

Split type heating furnace

2、Split type heating furnace function

Split type heating furnacemultifunctional, with functions such as quench, normalizing, temper, Casting heating and Forging heating，the principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the main features are Easy to control, Easy to maintain, energy saving and environmental protection, energy-efficient and Strong adaptability，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，it is mainly composed of ventilation system, combustor, recovery of waste heat, ventilation system and Radiation chamber，Split type heating furnaceThe structural design is more advanced and reasonable.。

Split type heating furnace

3、Split type heating furnace HD real shot

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Split type heating furnace

As you can see from the live video.，One-combustion energy saving It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

4、Structural advantages of Split type heating furnace

The Split type heating furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for Split type heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Split type heating furnace

5、Split type heating furnace price consultation

The Split type heating furnace price is introduced as follows:

1. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Split type heating furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Split type heating furnace price can meet the purchasing needs of customers.

2. market demand

When the market demand for Split type heating furnace is relatively high, manufacturers will raise the price in order to get more profits. On the contrary, when the market demand for this product is low, manufacturers will lower the price in order to sell the remaining products as soon as possible.

3. regional difference

The price of Split type heating furnace in Shandong(Province) is much lower than that in other regions, and One-combustion energy saving is a large enterprise specializing in the production and manufacture of Split type heating furnace not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Split type heating furnace price positioning more reasonable, low-cost and economical.

4. Reasonable sales model

One-combustion energy saving has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

5. deploy

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Split type heating furnace has a higher cost performance.

Split type heating furnace

6、One-combustion energy saving company discount

Split type heating furnace is a new type of hearth introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for building materials and other industries. Now consult One-combustion energy savingproduction-manufacturing的Split type heating furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Split type heating furnacethe main structure includes furnace chamber, convection chamber, ventilation system, recovery of waste heat, Radiation chamber and so on，in the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，is a popular Split type heating furnace。