What is a Bright heat treatment furnace? Introduction to the Working Principle of heating furnace

Bright heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，multifunctional, with functions such as anneal, Casting heating, heat treatment, hardening and tempering and normalizing，It has a wide range of uses, including Metal melting and casting, Metal forging heating, Improve production efficiency, Metal heat treatment and Energy conservation and environmental protection。The following is to introduce the Bright heat treatment furnace:

1、Brief introduction of Bright heat treatment furnace

Bright heat treatment furnaceIt is a forging heating device using gas as fuel.。

Bright heat treatment furnace

2、Bright heat treatment furnace characteristics

The Bright heat treatment furnace features are as follows:

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Easy to maintain

The structural design of the Bright heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Bright heat treatment furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Easy to maintain

The structural design of the Bright heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Bright heat treatment furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Bright heat treatment furnace

3、Bright heat treatment furnace video

You can buy Bright heat treatment furnace according to your needs and show you Bright heat treatment furnace videos.。

Bright heat treatment furnace

As you can see from the live video.，One-combustion energy saving in the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

4、Bright heat treatment furnace principle

Bright heat treatment furnaceat runtime,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it mainly includes Radiation chamber, combustor, recovery of waste heat, convection chamber and Radiation chamber，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，is a popular Bright heat treatment furnace，it has been widely used in pharmacy, automobile, shipping, surface treatment, light industry and other industries。

Bright heat treatment furnace

5、Bright heat treatment furnace use

The purpose of Bright heat treatment furnace is introduced as follows:

1. Metal forging heating

The Bright heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Bright heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal tempering

By properly heating and cooling the metal material, the Bright heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal forging heating

The Bright heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Bright heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Bright heat treatment furnace

6、Bright heat treatment furnace price

The Bright heat treatment furnace price is introduced as follows:

1. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Bright heat treatment furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Bright heat treatment furnace price can meet the purchasing needs of customers.

2. product model

Because of the different specifications of products, its price will be different, so its selling price is closely related to the model specifications, but the overall selling price of One-combustion energy saving is reasonable among similar products.

3. select a qualified person

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

4. Low cost of raw materials

The production cost is mainly the purchase of raw materials. One-combustion energy saving attaches great importance to the purchase of raw materials to ensure the comprehensive quality of products. Only excellent raw materials can produce excellent products, and the input cost of raw materials has a direct relationship with the formulation of product prices. Under the premise of ensuring excellent product performance, One-combustion energy saving strives to reduce the input cost of products, and customers are very satisfied with this.

5. regional advantages

Different provinces and regions have different consumption levels, different market positioning and different prices.

Bright heat treatment furnace

Bright heat treatment furnaceNatural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，the product looks beautiful.，is a kind of high quality and low price Bright heat treatment furnace。