Introduction to Isothermal quenching heat treatment furnace, introduction to heating furnace function advantages and characteristics

Isothermal quenching heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is carefully developed by One-combustion energy saving combined with advanced technology。The following is to introduce the Isothermal quenching heat treatment furnace:

1、Brief introduction of Isothermal quenching heat treatment furnace

Isothermal quenching heat treatment furnaceIt is a forging heating device using gas as fuel.，The structural design is more advanced and reasonable.，it is usually composed of ventilation system, convection chamber, combustor, furnace chamber and ventilation system，is designed by One-combustion energy saving with advanced technology。

Isothermal quenching heat treatment furnace

2、Isothermal quenching heat treatment furnace use

The purpose of Isothermal quenching heat treatment furnace is introduced as follows:

1. Metal forging heating

The Isothermal quenching heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Improve production efficiency

The Isothermal quenching heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal heat treatment

In addition to forging heating, Isothermal quenching heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Isothermal quenching heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Isothermal quenching heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Isothermal quenching heat treatment furnace

3、Isothermal quenching heat treatment furnace display

Isothermal quenching heat treatment furnace HD real shot, showing the product style.。

Isothermal quenching heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Introduction of Isothermal quenching heat treatment furnace characteristics

Isothermal quenching heat treatment furnace has the following characteristics

1. Easy to maintain

The structural design of the Isothermal quenching heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Easy to control

The combustion system and ventilation system of the Isothermal quenching heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Isothermal quenching heat treatment furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Efficient heating

The Isothermal quenching heat treatment furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Stable and reliable

The Isothermal quenching heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Isothermal quenching heat treatment furnace

5、Isothermal quenching heat treatment furnace principle

Isothermal quenching heat treatment furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It is mostly used in Energy conservation and environmental protection, Metal heat treatment, Metal heat treatment, Improve production efficiency, Energy conservation and environmental protection, Metal melting and casting and so on，the main features are Easy to maintain, Easy to control, Stable and reliable, energy saving and environmental protection and Stable and reliable。

Isothermal quenching heat treatment furnace

6、One-combustion energy saving workshop real shot

You can buy Isothermal quenching heat treatment furnace according to your needs and show you product videos.。

Isothermal quenching heat treatment furnace

As you can see from the live video.One-combustion energy saving is a popular Isothermal quenching heat treatment furnace。

Isothermal quenching heat treatment furnaceit has the characteristics of Easy to maintain, Easy to control, energy-efficient, Strong adaptability and energy saving and environmental protection，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。