Introduction to Rapid quenching heat treatment furnace, heating furnace advantages, characteristics and principles

Rapid quenching heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。The following is to introduce the Rapid quenching heat treatment furnace:

1、Brief introduction of Rapid quenching heat treatment furnace

Rapid quenching heat treatment furnaceIt is a forging heating device using gas as fuel.，it is widely used in material, machinery, building materials, chemical industry, shipping and other industries，it mainly includes ventilation system, convection chamber, recovery of waste heat, ventilation system and combustor，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，has been favored by more and more customers.。

Rapid quenching heat treatment furnace

2、Rapid quenching heat treatment furnace structure

The Rapid quenching heat treatment furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Radiation chamber

The heat load of the main place for Rapid quenching heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. furnace chamber

A space for holding metallic materials for heating.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Rapid quenching heat treatment furnace

3、Video analysis of Rapid quenching heat treatment furnace

On-site aerial photography of Rapid quenching heat treatment furnace。

Rapid quenching heat treatment furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it has the functions of heat treatment, normalizing, quench, Forging heating and Casting heating。

4、Rapid quenching heat treatment furnace function

Rapid quenching heat treatment furnacemultifunctional, with functions such as heat treatment, hardening and tempering, normalizing, anneal and quench。

Rapid quenching heat treatment furnace

5、Rapid quenching heat treatment furnace price advantage

The Rapid quenching heat treatment furnace price is introduced as follows:

1. type of operation

One-combustion energy saving has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

2. company strength

The nature of the manufacturer can also greatly affect the price of the Rapid quenching heat treatment furnace. General manufacturers are divided into direct sellers, agents and middlemen. If they are direct selling manufacturers, there are not too many intermediate links, and their sales prices are low.

3. Product technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

4. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

5. Different regions

One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Rapid quenching heat treatment furnace.

Rapid quenching heat treatment furnace

6、Company discount

Rapid quenching heat treatment furnace is a new type of heating furnace introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for Household necessities and other industries. Now consult Rapid quenching heat treatment furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Rapid quenching heat treatment furnacethe main features are Stable and reliable, Easy to control, Easy to maintain, Easy to maintain and energy-efficient，the product looks beautiful.，it has been widely used in Machinery manufacturing, shipping, pharmacy, surface treatment, chemical industry and other industries。