Introduction to Open close heat treatment heating furnace, introduction to heating furnace advantages and characteristics

Open close heat treatment heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it is an ideal choice for customers to buy Open close heat treatment heating furnace。The following is to introduce the Open close heat treatment heating furnace:

1、Brief introduction of Open close heat treatment heating furnace

Open close heat treatment heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Open close heat treatment heating furnace

2、Open close heat treatment heating furnace application

Open close heat treatment heating furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Open close heat treatment heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Improve production efficiency

The Open close heat treatment heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal tempering

By properly heating and cooling the metal material, the Open close heat treatment heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Energy conservation and environmental protection

The Open close heat treatment heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Open close heat treatment heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Open close heat treatment heating furnace

3、Open close heat treatment heating furnace function

Open close heat treatment heating furnacemultifunctional, with functions such as heat treatment, Forging heating, Casting heating, heat treatment and hardening and tempering，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is a Open close heat treatment heating furnace，reliable quality，low in price。

Open close heat treatment heating furnace

4、Structural characteristics of Open close heat treatment heating furnace

The Open close heat treatment heating furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. Radiation chamber

The heat load of the main place for Open close heat treatment heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Open close heat treatment heating furnace

5、Open close heat treatment heating furnace field real shot

On-site aerial photography of Open close heat treatment heating furnace。

Open close heat treatment heating furnace

As you can see from the live video.，One-combustion energy saving the product looks beautiful.。

6、Brief introduction of One-combustion energy saving

One-combustion energy saving is a strong and professional Open close heat treatment heating furnace manufacturer, with advanced Open close heat treatment heating furnace production technology and rich production experience. It will not only provide users with Open close heat treatment heating furnace with energy saving and environmental protection, but also provide users with complete pre-sales, in-sales and after-sales services for the benefit of users. Welcome new and old users to visit and buy.。

One-combustion energy saving

Open close heat treatment heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is widely used in shipping, material, surface treatment, war industry, chemical industry and other industries。