What is a Open close heat treatment industrial furnace? How much is the price of the forging furnace?

Open close heat treatment industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a common Open close heat treatment industrial furnace。

1、Brief introduction of Open close heat treatment industrial furnace

Open close heat treatment industrial furnaceIt is a forging heating device using gas as fuel.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，Widely used inMetal heat treatment,Improve production efficiency,Energy conservation and environmental protection,Metal tempering,Metal melting and casting and so on，it is widely used in pharmacy, electron, light industry, aerospace and electron，it mainly includes ventilation system, recovery of waste heat, ventilation system, combustor and Radiation chamber。

Open close heat treatment industrial furnace

2、Open close heat treatment industrial furnace characteristics

The Open close heat treatment industrial furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Efficient heating

The Open close heat treatment industrial furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Easy to maintain

The structural design of the Open close heat treatment industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Strong adaptability

The Open close heat treatment industrial furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Open close heat treatment industrial furnace

3、Advantages of Open close heat treatment industrial furnace principle

Open close heat treatment industrial furnacethe principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it is mainly composed of ventilation system, furnace chamber, convection chamber, recovery of waste heat and ventilation system，Open close heat treatment industrial furnaceSimple structure and advanced technology.，is an advanced Open close heat treatment industrial furnace developed by our company in combination with the actual situation of the industry。

Open close heat treatment industrial furnace

4、Open close heat treatment industrial furnace advantage

The advantages of Open close heat treatment industrial furnace are as follows:

1. Multiple fuel options

Although the Open close heat treatment industrial furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Extend the service life of equipment

The Open close heat treatment industrial furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Uniform heating

The Open close heat treatment industrial furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Wide application range

The Open close heat treatment industrial furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Open close heat treatment industrial furnace

5、How much is the Open close heat treatment industrial furnace?

The Open close heat treatment industrial furnace price is introduced as follows:

1. geographical position

One-combustion energy savingJinan, Shandong province, the transportation is convenient, and the corresponding cost of transporting Open close heat treatment industrial furnace is low, which reduces the cost of selling Open close heat treatment industrial furnace by manufacturers, and the price will also decrease.

2. Configuration difference

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Open close heat treatment industrial furnace, which is beyond doubt. One-combustion energy saving makes every product with great care in the attitude of being highly responsible to customers, so the price of One-combustion energy saving Open close heat treatment industrial furnace is reasonable for products with the same configuration.

3. marketing channel

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

4. raw material

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

5. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Open close heat treatment industrial furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Open close heat treatment industrial furnace price can meet the purchasing needs of customers.

Open close heat treatment industrial furnace

6、Company preferential activities

Open close heat treatment industrial furnace is a new type of forging furnace introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for metallurgy and other industries. Now consult One-combustion energy savingProduction and processing的Open close heat treatment industrial furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Open close heat treatment industrial furnaceit has the functions of temper, quench, Forging heating, anneal and normalizing，is a kind of high quality and low price Open close heat treatment industrial furnace。