Introduction to Decarbonization annealing heat treatment furnace and heating furnace structure principle

Decarbonization annealing heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，usually used in building materials, electron, shipping, metallurgy, war industry and other fields，is a kind of high quality and low price Decarbonization annealing heat treatment furnace，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，the product looks atmospheric.。

1、Brief introduction of Decarbonization annealing heat treatment furnace

Decarbonization annealing heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Decarbonization annealing heat treatment furnace

2、Introduction of Decarbonization annealing heat treatment furnace characteristics

Decarbonization annealing heat treatment furnace has the following characteristics

1. Easy to maintain

The structural design of the Decarbonization annealing heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Decarbonization annealing heat treatment furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Strong adaptability

The Decarbonization annealing heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Easy to control

The combustion system and ventilation system of the Decarbonization annealing heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Stable and reliable

The Decarbonization annealing heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Decarbonization annealing heat treatment furnace

3、Advantages of Decarbonization annealing heat treatment furnace principle

Decarbonization annealing heat treatment furnaceat runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is a popular Decarbonization annealing heat treatment furnace，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.。

Decarbonization annealing heat treatment furnace

4、Decarbonization annealing heat treatment furnace function

Decarbonization annealing heat treatment furnacemultifunctional, with functions such as Forging heating, hardening and tempering, anneal, normalizing and Casting heating，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，be loved by our customers.。

Decarbonization annealing heat treatment furnace

5、Decarbonization annealing heat treatment furnace application

Decarbonization annealing heat treatment furnaces have the following purposes.

1. Metal forging heating

The Decarbonization annealing heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Decarbonization annealing heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Decarbonization annealing heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Decarbonization annealing heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Improve production efficiency

The Decarbonization annealing heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Decarbonization annealing heat treatment furnace

6、Decarbonization annealing heat treatment furnace price advantage

The Decarbonization annealing heat treatment furnace price is introduced as follows:

1. Low cost of raw materials

Cost is a direct and fundamental factor that affects the price of Decarbonization annealing heat treatment furnace. The manufacturing cost is reflected in the capital investment spent on raw materials, labor and technology, which is high in cost, high in Decarbonization annealing heat treatment furnace price, low in cost and low in price.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. company strength

Direct selling by manufacturers and sales by middlemen will also affect product prices. There are not too many links among direct selling products, so the cost required by manufacturers is low, and the price of Decarbonization annealing heat treatment furnace is low. Customers can also put products into production in advance. On the contrary, when purchasing products from middlemen, there are not only many links, but also the price of Decarbonization annealing heat treatment furnace is much higher, so customers should choose products directly sold by manufacturers when purchasing.

4. deploy

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Decarbonization annealing heat treatment furnace, which is beyond doubt. One-combustion energy saving makes every product with great care in the attitude of being highly responsible to customers, so the price of One-combustion energy saving Decarbonization annealing heat treatment furnace is reasonable for products with the same configuration.

5. Self quality

The quality of the product determines the production process and results. Good quality means that the raw materials of the product are better and the price will definitely be higher.

Decarbonization annealing heat treatment furnace

Decarbonization annealing heat treatment furnaceit can be used in petroleum, surface treatment, aerospace, Household necessities, Machinery manufacturing and other industries，The overall structural design is relatively simple，it has the structure of ventilation system, convection chamber, Radiation chamber, recovery of waste heat and combustor。