What is a Multi chamber tempering furnace? Forging furnace specifications, models, and parameters

Multi chamber tempering furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a popular Multi chamber tempering furnace，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it is an ideal choice for customers to buy Multi chamber tempering furnace。

1、Brief introduction of Multi chamber tempering furnace

Multi chamber tempering furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it has the characteristics of Strong adaptability, Stable and reliable, energy-efficient, energy saving and environmental protection and Easy to maintain，was developed and designed by One-combustion energy saving。

Multi chamber tempering furnace

2、Multi chamber tempering furnace application

Multi chamber tempering furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Multi chamber tempering furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal forging heating

The Multi chamber tempering furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Multi chamber tempering furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Energy conservation and environmental protection

The Multi chamber tempering furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Multi chamber tempering furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Multi chamber tempering furnace

3、Introduction of Multi chamber tempering furnace characteristics

Multi chamber tempering furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Strong adaptability

The Multi chamber tempering furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Efficient heating

The Multi chamber tempering furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Multi chamber tempering furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Multi chamber tempering furnace

4、Working principle of Multi chamber tempering furnace

Multi chamber tempering furnaceat work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，The overall structural design is relatively simple and compact.，it has the structure of recovery of waste heat, ventilation system, furnace chamber, ventilation system and Radiation chamber，is a Multi chamber tempering furnace，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，is carefully developed by One-combustion energy saving combined with advanced technology。

Multi chamber tempering furnace

5、Multi chamber tempering furnace function

Multi chamber tempering furnaceit has the functions of Forging heating, anneal, hardening and tempering, Forging heating and Casting heating，Commonly used inMetal forging heating,Improve production efficiency,Metal heat treatment,Metal tempering,Metal tempering and so on，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，be of high quality，low in price。

Multi chamber tempering furnace

6、Multi chamber tempering furnace quotation

The Multi chamber tempering furnace price is introduced as follows:

1. technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

2. Configuration level

The difference in Multi chamber tempering furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

3. product model

The same product, even with different specifications and models and different configurations, has different costs, so the price will be different.

4. region

The price of Multi chamber tempering furnace in Jinan is much lower than that in other regions, and One-combustion energy saving is a factory with many years of manufacturing experience not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Multi chamber tempering furnace price positioning more reasonable, low-cost and economical.

5. specifications and models

One-combustion energy saving Multi chamber tempering furnace has various specifications and models, and the prices of different specifications and models are also different. The main difference lies in the different technologies used in the products and the different manufacturing costs. One-combustion energy saving Preferential activities will be launched regularly, and the whole set of purchasing Multi chamber tempering furnace will enjoy greater discounts

Multi chamber tempering furnace

Multi chamber tempering furnacethe advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，it is mainly composed of furnace chamber, convection chamber, recovery of waste heat, Radiation chamber and combustor，productThe overall structural design is relatively simple。