Introduction to Energy saving and environmentally friendly box type heating furnace, introduction to forging furnace advantages and characteristics

Energy saving and environmentally friendly box type heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，is a Energy saving and environmentally friendly box type heating furnace，It is mostly used in Metal heat treatment, Energy conservation and environmental protection, Metal heat treatment, Metal forging heating, Metal melting and casting, Metal tempering and so on，the product looks beautiful.。

1、Brief introduction of Energy saving and environmentally friendly box type heating furnace

Energy saving and environmentally friendly box type heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.。

Energy saving and environmentally friendly box type heating furnace

2、Introduction of Energy saving and environmentally friendly box type heating furnace characteristics

Energy saving and environmentally friendly box type heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Energy saving and environmentally friendly box type heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Stable and reliable

The Energy saving and environmentally friendly box type heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Strong adaptability

The Energy saving and environmentally friendly box type heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Efficient heating

The Energy saving and environmentally friendly box type heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Energy saving and environmentally friendly box type heating furnace

3、Introduction of advantages of Energy saving and environmentally friendly box type heating furnace

Energy saving and environmentally friendly box type heating furnaces have the following advantages.

1. Extend the service life of equipment

The Energy saving and environmentally friendly box type heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Uniform heating

The Energy saving and environmentally friendly box type heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Intelligent control

The Energy saving and environmentally friendly box type heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Wide application range

The Energy saving and environmentally friendly box type heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Multiple fuel options

Although the Energy saving and environmentally friendly box type heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Energy saving and environmentally friendly box type heating furnace

4、Energy saving and environmentally friendly box type heating furnace function

Energy saving and environmentally friendly box type heating furnacemultifunctional, with functions such as anneal, Forging heating, quench, Casting heating and heat treatment，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，The price is low and affordable，modern technology。

Energy saving and environmentally friendly box type heating furnace

5、Energy saving and environmentally friendly box type heating furnace structure

The Energy saving and environmentally friendly box type heating furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Radiation chamber

The heat load of the main place for Energy saving and environmentally friendly box type heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. furnace chamber

A space for holding metallic materials for heating.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Energy saving and environmentally friendly box type heating furnace

Energy saving and environmentally friendly box type heating furnaceit has the functions of anneal, normalizing, Forging heating, quench and Casting heating，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，widely used in automobile, Machinery manufacturing, petroleum, Household necessities, electron and other fields。