What is a Multi well heating furnace for heat treatment? Introduction to the principle of heating furnace structure

Multi well heating furnace for heat treatmentIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。The following is to introduce the Multi well heating furnace for heat treatment:

1、Brief introduction of Multi well heating furnace for heat treatment

Multi well heating furnace for heat treatmentIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，It is a product series that integrates Metal tempering, Energy conservation and environmental protection, Metal heat treatment, Metal heat treatment and Energy conservation and environmental protection，the advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，It can be used for Metal tempering, Metal melting and casting, Improve production efficiency, Metal forging heating, Metal heat treatment, Improve production efficiency and so on，is a kind of high quality and low price Multi well heating furnace for heat treatment。

Multi well heating furnace for heat treatment

2、Multi well heating furnace for heat treatment use

The purpose of Multi well heating furnace for heat treatment is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Multi well heating furnace for heat treatments can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal forging heating

The Multi well heating furnace for heat treatment can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Energy conservation and environmental protection

The Multi well heating furnace for heat treatment uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Energy conservation and environmental protection

The Multi well heating furnace for heat treatment uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal heat treatment

In addition to forging heating, Multi well heating furnace for heat treatments can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Multi well heating furnace for heat treatment

3、Multi well heating furnace for heat treatment characteristics

The Multi well heating furnace for heat treatment features are as follows:

1. Efficient heating

The Multi well heating furnace for heat treatment can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Easy to maintain

The structural design of the Multi well heating furnace for heat treatment is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Easy to maintain

The structural design of the Multi well heating furnace for heat treatment is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Stable and reliable

The Multi well heating furnace for heat treatment has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Multi well heating furnace for heat treatment

4、Multi well heating furnace for heat treatment advantage

The advantages of Multi well heating furnace for heat treatment are as follows:

1. Rapid temperature rise

The Multi well heating furnace for heat treatment can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Multiple fuel options

Although the Multi well heating furnace for heat treatment mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Uniform heating

The Multi well heating furnace for heat treatment adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. easy to operate

The operation interface of the Multi well heating furnace for heat treatment is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Multi well heating furnace for heat treatment can significantly reduce energy consumption, thus reducing operating costs.

Multi well heating furnace for heat treatment

5、Structural characteristics of Multi well heating furnace for heat treatment

The Multi well heating furnace for heat treatment structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Multi well heating furnace for heat treatment

Multi well heating furnace for heat treatmentmultifunctional, with functions such as hardening and tempering, Forging heating, hardening and tempering, Casting heating and temper，is a common Multi well heating furnace for heat treatment，It has a wide range of uses, including Metal tempering, Energy conservation and environmental protection, Metal melting and casting, Metal forging heating and Improve production efficiency。