Introduction to Double car bright annealing furnace, advantages, characteristics and principles of heating furnace

Double car bright annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。The following is to introduce the Double car bright annealing furnace:

1、Brief introduction of Double car bright annealing furnace

Double car bright annealing furnaceIt is a forging heating device using gas as fuel.，It is a product series that integrates Improve production efficiency, Energy conservation and environmental protection, Metal melting and casting, Metal tempering and Metal heat treatment，at runtime,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，The price is relatively low.。

Double car bright annealing furnace

2、Double car bright annealing furnace performance advantage

The advantages of Double car bright annealing furnace are as follows:

1. Rapid temperature rise

The Double car bright annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Efficient combustion

The Double car bright annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Intelligent control

The Double car bright annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Improve product quality

Because the Double car bright annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Extend the service life of equipment

The Double car bright annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Double car bright annealing furnace

3、Double car bright annealing furnace use

The purpose of Double car bright annealing furnace is introduced as follows:

1. Improve production efficiency

The Double car bright annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal forging heating

The Double car bright annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Energy conservation and environmental protection

The Double car bright annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Double car bright annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Double car bright annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Double car bright annealing furnace

4、Introduction of Double car bright annealing furnace characteristics

Double car bright annealing furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Double car bright annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

2. Stable and reliable

The Double car bright annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to maintain

The structural design of the Double car bright annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Strong adaptability

The Double car bright annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Easy to control

The combustion system and ventilation system of the Double car bright annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Double car bright annealing furnace

5、Double car bright annealing furnace customer scene picture

The Double car bright annealing furnace looks beautiful and atmospheric, and it is realistic for customers to visit.。

Double car bright annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Double car bright annealing furnace function

Double car bright annealing furnacemultifunctional, with functions such as heat treatment, quench, temper, hardening and tempering and Forging heating，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，was developed and designed by One-combustion energy saving。

Double car bright annealing furnace

Double car bright annealing furnacethe product looks atmospheric.，it is widely used inheat treatment,material,Machinery manufacturing,building materials,machinery and other industries。