Introduction to High temperature trolley heating furnace, advantages, characteristics and principles of Forging furnace

High temperature trolley heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the functions of Forging heating, temper, anneal, hardening and tempering and quench，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。The following is to introduce the High temperature trolley heating furnace:

1、Brief introduction of High temperature trolley heating furnace

High temperature trolley heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，the product looks beautiful.，can be customized according to user's needs.。

High temperature trolley heating furnace

2、High temperature trolley heating furnace structure composition

The High temperature trolley heating furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

High temperature trolley heating furnace

3、High temperature trolley heating furnace real shot picture

The finished products of the High temperature trolley heating furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

High temperature trolley heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、High temperature trolley heating furnace characteristics

The High temperature trolley heating furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Strong adaptability

The High temperature trolley heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Efficient heating

The High temperature trolley heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to maintain

The structural design of the High temperature trolley heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Easy to control

The combustion system and ventilation system of the High temperature trolley heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

High temperature trolley heating furnace

5、High temperature trolley heating furnace use

The purpose of High temperature trolley heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The High temperature trolley heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The High temperature trolley heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of High temperature trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Improve production efficiency

The High temperature trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Energy conservation and environmental protection

The High temperature trolley heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

High temperature trolley heating furnace

6、High temperature trolley heating furnace price concessions

The High temperature trolley heating furnace price is introduced as follows:

1. market factors

Market change is the main factor that affects the price level. Because of the instability and uncertainty of the market, the sales price of High temperature trolley heating furnace will fluctuate greatly, and the market changes are various.

2. cost of production

A High temperature trolley heating furnace needs to spend a lot of manufacturing costs from research and development to production to sales, including raw material costs, technical costs, labor costs, etc. The higher the manufacturing cost, the higher the price will be.

3. product quality

The quality of the High temperature trolley heating furnace is the key factor that affects its price. The manufacturer of high-quality products has high cost in production and high product performance, which can bring higher economic benefits to customers. Because the manufacturer of high-quality products has high production investment, the manufacturer is on the high side when positioning the High temperature trolley heating furnace price.

4. regional difference

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

5. raw material

The quality of material selection is one of the main factors that directly affect the High temperature trolley heating furnace. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

High temperature trolley heating furnace

High temperature trolley heating furnacethe main structure includes recovery of waste heat, combustor, furnace chamber, Radiation chamber, convection chamber and so on，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it has the characteristics of energy-efficient, energy-efficient, Stable and reliable, Strong adaptability and energy saving and environmental protection。