Introduction to Explosion proof trolley furnace, forging furnace advantages, characteristics and principles

Explosion proof trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

1、Brief introduction of Explosion proof trolley furnace

Explosion proof trolley furnaceIt is a forging heating device using gas as fuel.，Cheap and high quality。

Explosion proof trolley furnace

2、Explosion proof trolley furnace advantage

The advantages of Explosion proof trolley furnace are as follows:

1. Improve product quality

Because the Explosion proof trolley furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. easy to operate

The operation interface of the Explosion proof trolley furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Uniform heating

The Explosion proof trolley furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. Efficient combustion

The Explosion proof trolley furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Extend the service life of equipment

The Explosion proof trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Explosion proof trolley furnace

3、Explosion proof trolley furnace characteristics

The Explosion proof trolley furnace features are as follows:

1. Easy to maintain

The structural design of the Explosion proof trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Explosion proof trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Efficient heating

The Explosion proof trolley furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to maintain

The structural design of the Explosion proof trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Explosion proof trolley furnace

4、Explosion proof trolley furnace structure

The Explosion proof trolley furnace structure is introduced as follows:

1. Radiation chamber

The heat load of the main place for Explosion proof trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. Radiation chamber

The heat load of the main place for Explosion proof trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Explosion proof trolley furnace

5、Structural advantages of Explosion proof trolley furnace

The Explosion proof trolley furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Explosion proof trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Explosion proof trolley furnace

6、How to choose the right product manufacturer?

Choosing a suitable Explosion proof trolley furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Explosion proof trolley furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Explosion proof trolley furnacefeatures include Strong adaptability, Easy to control, Easy to maintain, Easy to control and Easy to maintain，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。