Introduction to Side in, side out, step in and out furnace, introduction to forging furnace advantages and characteristics

Side in, side out, step in and out furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，has been favored by more and more customers.。

1、Brief introduction of Side in, side out, step in and out furnace

Side in, side out, step in and out furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks beautiful.，It has a wide range of uses, and is often used inMetal forging heating,Metal tempering,Energy conservation and environmental protection,Improve production efficiency,Metal forging heating and so on，it is an ideal choice for customers to buy Side in, side out, step in and out furnace。

Side in, side out, step in and out furnace

2、Side in, side out, step in and out furnace principle

Side in, side out, step in and out furnaceat runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，Widely used in Metal melting and casting, Improve production efficiency, Metal tempering, Energy conservation and environmental protection and Metal heat treatment，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，the main features are Easy to maintain, energy-efficient, Strong adaptability, energy saving and environmental protection and Easy to control，The price is relatively low.，modern technology。

Side in, side out, step in and out furnace

3、Side in, side out, step in and out furnace video live broadcast

You can buy Side in, side out, step in and out furnace according to your needs and show you product videos.。

Side in, side out, step in and out furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd widely used in pharmacy, machinery, petroleum, electron, material and other fields。

4、Side in, side out, step in and out furnace characteristics

The Side in, side out, step in and out furnace features are as follows:

1. Efficient heating

The Side in, side out, step in and out furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Stable and reliable

The Side in, side out, step in and out furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Side in, side out, step in and out furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Easy to maintain

The structural design of the Side in, side out, step in and out furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Easy to control

The combustion system and ventilation system of the Side in, side out, step in and out furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Side in, side out, step in and out furnace

5、Side in, side out, step in and out furnace application

Side in, side out, step in and out furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Side in, side out, step in and out furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal heat treatment

In addition to forging heating, Side in, side out, step in and out furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Improve production efficiency

The Side in, side out, step in and out furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Energy conservation and environmental protection

The Side in, side out, step in and out furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Improve production efficiency

The Side in, side out, step in and out furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Side in, side out, step in and out furnace

6、Side in, side out, step in and out furnace price

The Side in, side out, step in and out furnace price is introduced as follows:

1. region

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

2. marketing channel

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

3. market supply and demand

The market has great fluctuation, which is also the key factor that leads to the imbalance and instability of supply and demand, and then leads to great changes in product prices. Only after a comprehensive understanding and investigation of the market can we make a reasonable decision, and then we can formulate a Side in, side out, step in and out furnace price sales plan that customers are satisfied with, and the main reason for its price rationality is also reflected here.

4. regional difference

The price of Side in, side out, step in and out furnace in Shandong(Province) is much lower than that in other regions, and One-combustion energy saving is a self-produced and self-selling manufacturer not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Side in, side out, step in and out furnace price positioning more reasonable, low-cost and economical.

5. technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

Side in, side out, step in and out furnace

Side in, side out, step in and out furnaceThe user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，is a Side in, side out, step in and out furnace。