What is a End in end out step in/out furnace? Introduction to the advantages, characteristics, and principles of the heating furnace

End in end out step in/out furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a popular End in end out step in/out furnace，structure mainly includes: convection chamber, Radiation chamber, ventilation system, combustor, ventilation system and so on，productThe overall structural design is simple and novel.，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，the product looks atmospheric.。

1、Brief introduction of End in end out step in/out furnace

End in end out step in/out furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it has the characteristics of Stable and reliable, Strong adaptability, Easy to control, Easy to maintain and energy saving and environmental protection。

End in end out step in/out furnace

2、End in end out step in/out furnace characteristics

The End in end out step in/out furnace features are as follows:

1. Efficient heating

The End in end out step in/out furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Stable and reliable

The End in end out step in/out furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Strong adaptability

The End in end out step in/out furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

End in end out step in/out furnace

3、End in end out step in/out furnace advantage

The advantages of End in end out step in/out furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Improve product quality

Because the End in end out step in/out furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Multiple fuel options

Although the End in end out step in/out furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the End in end out step in/out furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Intelligent control

The End in end out step in/out furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

End in end out step in/out furnace

4、Working principle of End in end out step in/out furnace

End in end out step in/out furnaceat runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It is a product series that integrates Metal melting and casting, Improve production efficiency, Energy conservation and environmental protection, Metal tempering and Metal melting and casting，be loved by our customers.。

End in end out step in/out furnace

5、End in end out step in/out furnace structure

The End in end out step in/out furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

End in end out step in/out furnace

6、End in end out step in/out furnace price consultation

The End in end out step in/out furnace price is introduced as follows:

1. Proper management mode

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

2. Brand strength

At present, there are various brands of End in end out step in/out furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of End in end out step in/out furnace are different.

3. Self quality

As we all know, the service life of products with excellent quality will be longer, and at the same time, the benefits created by such products for customers will be higher, which will lead to an increase in the cost of products and a high sales price of products.

4. product model

There are several specifications and models of End in end out step in/out furnace, and the specific price varies with different configurations. In addition, according to different customer needs, it is necessary to configure suitable End in end out step in/out furnace, and the budget and other requirements recommend suitable End in end out step in/out furnace for everyone.

5. Configuration difference

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving End in end out step in/out furnace has a higher cost performance.

End in end out step in/out furnace

End in end out step in/out furnaceis a kind of high quality and low price End in end out step in/out furnace，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.。