Introduction to Anchor chain annealing furnace, forging furnace advantages, characteristics and principles

Anchor chain annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Easy to control,Strong adaptability,energy-efficient,Stable and reliable,energy saving and environmental protection，is a kind of Anchor chain annealing furnace manufactured by One-combustion energy saving。The following is to introduce the Anchor chain annealing furnace:

1、Brief introduction of Anchor chain annealing furnace

Anchor chain annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，The structural design is simple, novel and special.，structure mainly includes: Radiation chamber, ventilation system, ventilation system, furnace chamber, convection chamber and so on，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，it is an ideal choice for customers to buy Anchor chain annealing furnace。

Anchor chain annealing furnace

2、Anchor chain annealing furnace video detail

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Anchor chain annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it has the functions of Forging heating, temper, anneal, Casting heating and normalizing。

3、Introduction of Anchor chain annealing furnace characteristics

Anchor chain annealing furnace has the following characteristics

1. Easy to control

The combustion system and ventilation system of the Anchor chain annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Easy to maintain

The structural design of the Anchor chain annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Anchor chain annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Strong adaptability

The Anchor chain annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Anchor chain annealing furnace

4、Anchor chain annealing furnace function

Anchor chain annealing furnacemultifunctional, with functions such as anneal, hardening and tempering, quench, temper and heat treatment，be loved by our customers.。

Anchor chain annealing furnace

5、Anchor chain annealing furnace principle

Anchor chain annealing furnaceThe high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，the main structure includes combustor, combustor, ventilation system, Radiation chamber, ventilation system and so on，Anchor chain annealing furnaceThe overall structural design is relatively simple and compact.，it is widely used inpetroleum,chemical industry,surface treatment,material,heat treatment and other industries。

Anchor chain annealing furnace

6、Company selection

Choosing a suitable Anchor chain annealing furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Anchor chain annealing furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Anchor chain annealing furnaceCommonly used inMetal melting and casting,Metal forging heating,Metal tempering,Metal tempering,Metal melting and casting and so on，it can be used in Machinery manufacturing, pharmacy, war industry, metallurgy, Machinery manufacturing and other industries，is a common Anchor chain annealing furnace。