Introduction to Roller bottom solid solution quenching furnace and heating furnace advantages and features

Roller bottom solid solution quenching furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a Roller bottom solid solution quenching furnace，reliable quality。The following is to introduce the Roller bottom solid solution quenching furnace:

1、Brief introduction of Roller bottom solid solution quenching furnace

Roller bottom solid solution quenching furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the main structure includes furnace chamber, Radiation chamber, convection chamber, ventilation system, recovery of waste heat and so on，the product looks beautiful.，was developed and designed by One-combustion energy saving。

Roller bottom solid solution quenching furnace

2、Roller bottom solid solution quenching furnace use

The purpose of Roller bottom solid solution quenching furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Roller bottom solid solution quenching furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Energy conservation and environmental protection

The Roller bottom solid solution quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the Roller bottom solid solution quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal forging heating

The Roller bottom solid solution quenching furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Roller bottom solid solution quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Roller bottom solid solution quenching furnace

3、Roller bottom solid solution quenching furnace characteristics

The Roller bottom solid solution quenching furnace features are as follows:

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Roller bottom solid solution quenching furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Strong adaptability

The Roller bottom solid solution quenching furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Easy to control

The combustion system and ventilation system of the Roller bottom solid solution quenching furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Efficient heating

The Roller bottom solid solution quenching furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Roller bottom solid solution quenching furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Roller bottom solid solution quenching furnace

4、Roller bottom solid solution quenching furnace principle

Roller bottom solid solution quenching furnacein the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Roller bottom solid solution quenching furnace

5、Roller bottom solid solution quenching furnace function

Roller bottom solid solution quenching furnacemultifunctional, with functions such as normalizing, temper, Forging heating, normalizing and quench，the main features are Stable and reliable, Easy to control, energy saving and environmental protection, energy saving and environmental protection and energy-efficient。

Roller bottom solid solution quenching furnace

6、Roller bottom solid solution quenching furnace use

The purpose of Roller bottom solid solution quenching furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Roller bottom solid solution quenching furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Improve production efficiency

The Roller bottom solid solution quenching furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Roller bottom solid solution quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Roller bottom solid solution quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal forging heating

The Roller bottom solid solution quenching furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Roller bottom solid solution quenching furnace

Roller bottom solid solution quenching furnaceit is widely used in automobile, petroleum, Household necessities, chemical industry, aerospace and other industries，is a common Roller bottom solid solution quenching furnace，It is an efficient, energy-saving and environment-friendly metal heating device.。