Introduction to Regenerative burner roller bottom heating furnace, how much is the price of the heating furnace?

Regenerative burner roller bottom heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，It can be used for Metal melting and casting, Metal forging heating, Metal tempering, Metal heat treatment, Improve production efficiency, Energy conservation and environmental protection and so on，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.。

1、Brief introduction of Regenerative burner roller bottom heating furnace

Regenerative burner roller bottom heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，has been favored by more and more customers.。

Regenerative burner roller bottom heating furnace

2、Regenerative burner roller bottom heating furnace advantage

Regenerative burner roller bottom heating furnaces have the following advantages.

1. Extend the service life of equipment

The Regenerative burner roller bottom heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Regenerative burner roller bottom heating furnace can significantly reduce energy consumption, thus reducing operating costs.

3. Multiple fuel options

Although the Regenerative burner roller bottom heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Intelligent control

The Regenerative burner roller bottom heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Wide application range

The Regenerative burner roller bottom heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Regenerative burner roller bottom heating furnace

3、Regenerative burner roller bottom heating furnace use

The purpose of Regenerative burner roller bottom heating furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative burner roller bottom heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal heat treatment

In addition to forging heating, Regenerative burner roller bottom heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal tempering

By properly heating and cooling the metal material, the Regenerative burner roller bottom heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Energy conservation and environmental protection

The Regenerative burner roller bottom heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal forging heating

The Regenerative burner roller bottom heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Regenerative burner roller bottom heating furnace

4、Advantages of Regenerative burner roller bottom heating furnace principle

Regenerative burner roller bottom heating furnaceat runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，energy saving and environmental protection,Easy to maintain,Strong adaptability,energy-efficient,Stable and reliable，It has the functions of Metal forging heating, Metal forging heating, Improve production efficiency, Metal heat treatment and Metal tempering，is a kind of high quality and low price Regenerative burner roller bottom heating furnace，generally, it is composed of Radiation chamber, ventilation system, furnace chamber, ventilation system, combustor and other major components。

Regenerative burner roller bottom heating furnace

5、Regenerative burner roller bottom heating furnace HD real shot

Overview of high-definition pictures,the product looks atmospheric., different specifications and models。

Regenerative burner roller bottom heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Structural advantages of Regenerative burner roller bottom heating furnace

The Regenerative burner roller bottom heating furnace has the following structure

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Regenerative burner roller bottom heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Regenerative burner roller bottom heating furnace

Regenerative burner roller bottom heating furnaceWidely used inMetal melting and casting,Energy conservation and environmental protection,Metal heat treatment,Metal tempering,Improve production efficiency and so on，the product looks beautiful.。